Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Bone9

    Bone's V8 Disco 2 Build Log

    So just recently I had a Bank 2 Sensor 1 code pop up. So I ordered 2 new Bosch sensors. Fitted these yesterday, fired it up and the sensor was still showing as unresponsive. So out came the new sensor and in went the good sensor from bank 1. Still unresponsive! Checked the wiring, looked fine...
  2. Bone9

    Bone's V8 Disco 2 Build Log

    Here we go lads. It's been bugging us all!
  3. Bone9

    Bone's V8 Disco 2 Build Log

    It's for a p38 with the same engine.
  4. Bone9

    Bone's V8 Disco 2 Build Log

    Right the earth cables are sorted! I made new ones from scratch from 50mm2 cable so a slight upgrade from the 40mm2.
  5. Bone9

    Bone's V8 Disco 2 Build Log

    Another day another upgrade! I got a Bosch 150A alternator to accompany the battery and to give my DC-DC charger plenty of juice. 120A to 150A. Check out the size difference! Nice and snug. I also got a Gunson smart battery alarm, this goes off if the battery drops to 12.2v. This...
  6. Bone9

    Bone's V8 Disco 2 Build Log

    Cheers buddy, much appreciated.
  7. Bone9

    Bone's V8 Disco 2 Build Log

    My battery died so an upgrade was in order obviously!! Old (069) 68Ah 560A New (C31-1000) 120Ah 930A Fitted got a few problems. The battery fits straight in with no issues but I had some previous wiring that wouldn't reach as the terminals are now in the center of the battery instead of...
  8. Bone9

    Bone's V8 Disco 2 Build Log

    I sourced a genuine fan and mounting bars from Spain. These were in great condition and rust free. I took the opportunity to refurbish the bars. Stripped back, 2 coats of red oxide primer and 4 coats of tough gloss black. They came out mint. As you can see my bar (only had the lower) has seen...
  9. Bone9

    Bone's V8 Disco 2 Build Log

    Cheers mate.
  10. Bone9

    Bone's V8 Disco 2 Build Log

    Todays job was to replace the wiring loom conduit as it was crumbling away! Before... After...
  11. Bone9

    Bone's V8 Disco 2 Build Log

    So I've been busy and removed my LPG system as my local garage has put the price up to £1.29 per litre!! It's now cheaper to run on premium unleaded and less hassle. It's never been 100% anyway and I'm relieved to have it off. No more stressing about fuel trims etc. The landy drives so much...
  12. Bone9

    Bone's V8 Disco 2 Build Log

    The road test was perfect with the BMW sensor, no false readings 👍 Today I fitted a new condenser and receiver/dryer. Must of had a slight leak as only had 200 of refrigerant instead of 700. All sorted now and extremely cold AC :D
  13. Bone9

    Bone's V8 Disco 2 Build Log

    My coolant bottle decided to crack so an upgrade had to be done. I've installed the BMW expansion tank with level sensor. I've also removed the throttle body heater as It developed a leak again!! I've ran an 8mm silicone hose from the lower inlet manifold that has a braided sleeve to prevent...
  14. Bone9

    V8 vacuum leak on throttle body spindle

    My friend had a good one.
  15. Bone9

    V8 vacuum leak on throttle body spindle

    I swapped the throttle body.
  16. Bone9

    Bottle Jack seals

    Any update on the video mate?
  17. Bone9

    D2 boys club

    Ah ok. Cheers mate.
  18. Bone9

    D2 boys club

    Thanks. When do you think the website will be back?
  19. Bone9

    Disco 2 How do you fit the ****ing A pillar trims?

    There should be no gap.
  20. Bone9

    D2 boys club

    Can someone who is on the FB group request that I'm accepted please?
Back
Top