Search results

Waste of money, might as well rub them over with WD40 or black boot polish

Basically every school run mummy is running round in one on lease, it amazes me just how many Ranges/discos and evoque there are around here

Yes we have all had some sort of damage in the past with potholes, cracked alloys, broken springs etc etc but here is a new one for you, started Rangy and drove down road flooring it turbo kicks in with a good old surge, stopped at end of close, turned right and surged it again then suddenly hit...

Had this not with my p38 diesel but with my MG ZT diesel bmw engine, cause was full pump struggling to lift fuel when ever fuel tank dropped to 1/4 or below, other MG members found tank vent blockage causes same problem as Paul D said earlier

Do like the finish on that

HVLP devibliss spray gun , better quality, better finish unless you want a lot of cutting back and practise practise practise

Simple answer to that is no, every manufacturer uses a different profile, you could try Rimmer Bros or somewhere like CBSonline who do different profiles for kitcar builders, you could if you feel confident even change it for a similar profile i.e size wise which slots in then you insert a...

From what your saying and what I can see from your pictures they maybe held in like rubber mounted windscreens where the rubber has a groove that sits on the metal cutout, to remove would require you to push in one corner of the rubber from the inside to unhook it from metal and slowly work...

Oh and welcome to the group :)

Hi , the rubber should pull off the ali frame once you lift the edge/joint, you can then drill out the rivets. Think a Company called Masai have a how to on their site, maybe even on youtube. Take your time and good luck

:cool::);)

You talking to me PUNK !!!!

Oh yes I soon discovered that, have just decided to rebuild her bit by bit, but don't tell her in doors:rolleyes:

You and me both, 62 and I have found smilies , Right on kiddo

:p:p:p:p;)

Many thanks for your help., have just been on eurocarparts and ordered a set using discount applied this weekend and Kevstar I normally help other people and have done for many many years but your never to old to listen and learn Son

Cheers ,was thinking recently of changing glow plugs as a matter of course, Beru are the favoured ones I believe

Comedian

Ok folks, riddle me this, starting procedure prior to putting new air filter (bosch) in was as follows, key in, turn, wait for glow plug indicator to go out, crank for two seconds then switch off and redo sequence engine would then start straight away. Now having put new air filter on the engine...