Search results

thanks DUBBLE RR,and RICK, rick you did my becm last year ,will dig out paper work and let you know,tommorrow hopefully,and find numbers,thanks. i changed everything because it would not run DUBBLERR ,did head gaskets ,still not run, then i had engine reconditioned, had broken piston rings ,they...

thanks Marjon, i did that and it just popped and didnt run ,thanks

hi,p38 gems 4.6 1996 wont start,i have petrol in rail under pressure,have spark,fuel not going through injectors, i have a syncmate and a nanocom, it says mobilised yes,new fuel cut off switch,new plugs ,new coil,new fuel pressure regulator,new ht leads,new filter,and petrol pump. nanocom says...

these threads have given me a mile of information guys,thanks.

thanks guys:)

Ok i will keep researching i expect i am blac klisted for some thing i ve done wrong, thanks

d Do i need a syncmate to get it started as nanocom wont ,or am i doing it wrong as usual,i just thought as i have engine check light ,which goes out whe n cranking,it would start ?thanks for any info in advance,

will do tomorow,nanocom produced code p0201 today , circuit open or short, cleared it but keeps coming back,also disconected maff and it fired once, jumped fuel relay ,still no start,also on imputs security learn no, security mobilised yes, nanocom says ecu is 4litre manual?i have got more...

thanks Adam,they said they had it running on easy start to test it ? but they wernt sure about electrics,I will try it today with easy start see if it runs,also disconect maf and try,also jump fuel relay try,thanks

:) not to worry i will carry on with car,and find defect eventuly ,its been over a year now since started:confused:

what is !!!

yes i can hear it,and have full fuel pressure in rail,thanks ovalndrover

hi engine was out,wells reid did it,full recondition,heads skimmed pressure tested,and block,new rings bearings etc,has not run before or after recondition,no fault codes,will try it disconect maf today,thanks Adam.

sorry for butting in on Merlins thread,i forgot to think,its an age thing, my car is a 1996 4.6 gems engined hse, thanks Mozz.

thanks,MOZZ and DATATEC, my car will attempt to start on easy start,it has spark,it has fuel pressure 40 psi in the rail,fuel injectors flash when turning over, so crank sensor,seems okay,but no fuel to plugs,Rick call rover checked out becm for me,have engine check light,goes out when...

i have had three auto elec men in east sussex,still wont start? 4.6 gems 1996 hse

thanks KEV & GRRRR for the info ,will have a look

hi would a free running ecu help do you think? thanks

on mine 1996 4.6 they dont have cover on,i found on mine it was easier to take wheel off and inner mud guard ,i could see it easier and use socket .i have done it from under side with a lot of frustration?

hi, i would like a known working ERR 6645 ecu for gems 4.6 1996 hse thankyou rick