Search results

Thanks guys, i think its going to have to be a new axle, it looks like the salisbury is bent (i have no idea how) so I'm in the process of calling breakers yards to see what they have.

HI All, I think the diff is shot in my Salisbury axle. Rather than go though the pain, I think I will swap it for a later short nose axle. Means less pain long term, means i can put an ashlocker in there later on if i want. My question is, is there is specific type of axle that will fit, I've...

Also check out Jim Bowen at the moose bar. Look at what you could'a won...

Which ones? There was a man ****ing in a bin earlier so by those standards, could be any!!

Arrived about and hour and half ago. The sun is out at the moment, just missed the monsoon. Camped down in the bottom corner.

Hi Folks, Whats the normal mounting point for the horn on a 300tdi, mine doesn't work and I'm beginning to suspect its missing (and also wondering how it passed MOT if it didn't have one). On the disco it appears to be just behind the front grill, but not sure if the defender is the same...

Free, as long as you can collect from Rotherham area 2 x makita circular saw boxes 1 x makita drill box 1 x multi tool box

The Landrover Toolbox (Trailerfitter) video's on turbo boost says that boost should be about 1bar at 3000RPM if I remember correctly:

Morning all, I have a leak from my oil breather - seems to be caused by pressure in the rocker cover, if I remove the breather, all is ok. When the breather is on and tight, I get a trickle of oil from the breather where it connects to the rocker cover. Is it likely to be a blocked pipe, or...

Doesn't Harry Blow make those gummy sweets? I'll get my coat...

Is there anywhere we can report this stuff, like to the fuzz - looking at the sellers other items, they all look dodgy.

Thanks, I figured it out, the wiring diagram for the 300tdi shows Green/White for the live, however, its actually just green. That's what confused me, I think at some point there has been melting or a small fire in the fuse box, and its been replaced - with cables spliced in to a replacement...

https://www.ebay.co.uk/itm/263063080020

Evening All, My wipers were behaving erratically and generally being **** (not parking, sticking etc) so i have replaced the motor, cable and wheelboxes (thanks to Busters guide). The relay also went pop at some point, although the wipers were working all be it erratically, so i replaced that...

I have one of these http://www.ebay.co.uk/itm/Portable-Car-Battery-Power-Booster-Jump-Start-Starter-Rescue-Pack-1800-AMP-12v-/141700613839?hash=item20fe03c6cf:g:E38AAOSwT6pViQxT Its been pretty good so far.

Thanks all, will look at the prop tool, I tried both from underneath and from above via the access panel under the cubbybox. I think the problem is that i cant get enough leverage on the damn thing.

Evening all, I just wondered if there was a knack to removing the rear propshaft. The one installed is a wide angle jobby, but I cannot for the life of me get a socket around them, and cannot get enough purchase on the nuts with a normal spanner.

Thanks! I presume the other smaller stalk is for the sidelights?

Evening, After a day of trying to figure out why my headlights / sidelights don't work, it turns out that the previous owner had started a rewire of them but never finished, and its a bag of ****. So I am going to require from scratch. I am also replacing the stalks as they are knackered, but...

Here is the roof rack, I can't find the clamps for it, but if you still want it let me know. Needs a bit of a clean and paint.