Search results

Problem found after much checking,the plus in the nearside footwell was slightly corroded,cleaned with Servisol Switch cleaner and everything sprang back to life.It is the large plug that had corrosion this is due to the cover plate in the windscreen scuttle not sealing,will now c/o silicone.

The EAS setting program I use shows the actual figures and below the programmed figures,thsea I had saved and re entered them.I need to get it to work before I can set it to correct levels.

Any ideas as to what is not connecting

The idle is good and the EAS program was at zero on all setting of the four heights due to the vehicle having been left with a flat battery,the BECM was reset by the Brighton people and works fine. I then set all the levels to the correct settings and as soon as the unit started it dumped all...

Strange one,set up the system pressures as normal and everything returns to 255 on both panels of program easy unlock. Have tried several times with the same result any ideas.

Have for sale the above,in good mechanical condition,new clutch 1000 miles ago and not used for 12 months,starts first turn of key. Chassis is good as is most of the body but scratched paintwork. Bad Points Door locks not working due to the pin on door lock having broken and the rear door catch...

Clock works fine,£15 delivered

As far as I know,will remove and check.

I am currently taking my RR apart for spares,the gearbox went and I needed the interior for my 97 V8. If you are in need of any electronics they are all available as is the engine which has done about 80k and was in first class running order when I laid the car up 2 years ago.I will sell any...

JUST TO MAKE MATTERS WORSE,WE ORDERED A DIESEL HEATER ON EBAY and yes you got it,delivered by Evri left outside at wrong address in the rain,now I know why they changed their name to,Because Evri delivery is a cock up.

My partner was having work done on her P38 including new calpers and brake pipes,so we ordered all on line,no problem with the calipers but when the brake pipes from foundry4x4 arrived the blister pack had been opened and 4 pipes were in the pack,my partner was not aware that there should be 6...

What does the exhaust consist of after the down pipes.

Well from what I can see the twin pipe is for show as to run twin pipes from the engine to a single pipe and back to a twin is totally pointless, typical LR cosmetics. Anyone know who supplies single systems

Anyone know if the p38 was ever fitted with a single exhaust rather than the twin for show,it seems that the single system was more efficient and was changed to reduce the noise after the classic. Thinking of using a single system to make it simpler,

Anyone doing door lock repairs for P38,Marty is away again so need an alternative.

Not a jlr rebuild dealer but not sure who,strange it was re registered.

Just heard from my daughter that her neighbour has bought a Rangie 1,from the last batch of 25.A special by all accounts. Paid £49,999 for it and when checked on dvla it had done 214168 miles before being rebuilt and re registered as a 2002 and clocked 1756 since. Has the world gone totally mad.

Many Thanks,Paul

Can anyone tell me the thread size of the green coolant sensor on the 4 L gems engine. Intend to replace with a proper unit,anyone done this and can suggest the best setup,capillary tube pref.

Many thanks will try the MAF plug first,will put a prayer mat down as well:rolleyes: