Search results

I tried it this way as when lowering it it still seemed to be hard to access, although to be fair I didnt remove the acoustic cover as it seemed a bit stuck so I went with that method and acces to those top bolts seemed to be worth the effort in removing the engine mounts. I just thought I`d...

If you do have a crack at it youself (only the second clutch i`ve done) it`s worth dropping out the engine mounts & lowering it to get easy access to the top bellhousing mounts. To make things even eaier I even took off the bonnet as it`s only x4 bolts and just gives you easier access along with...

Any recommendations for moderately priced kits ? looking on the bay item there is a kit that contains valeo flywheel Borg & beck clutch cover/plate/thrust bearing and OEM spigot bearing all for 380 posted

Think you’re right, just wondering wether to spend the £ or not. I didn’t actually find it too bad dropping the box and I have another vehicle to use whilst I do it. The two worst bits of the job were removing the x members (the first I had to cut off with the angle grinder as I did previously...

I know this will probably open up a can of worms, but should I replace the dmf along with the clutch ? A bit of background info. I had replaced the broken bias plate & springs etc late year & got nice smooth changes but my second gear synchro has needed replacing for a little while wich I put...

Quick update. I`ve got a spare abs ecu,so hopefully with help from sierrafery I can get it set up using Hawkeye.

If I had the funds I think I would lol, although I prefer the warnth of the disco to the defender I had after a day out fowling in the cold. Daniel.

Nope nothing happens at all when I press the ORM button. The suspension rises once car is started. Daniel

Right I`ve had chance to stick the key in and have a look. When I turn the key on all the dash test lights come on, then go out and the off road mode & sls re-appear, along with the handbrake,battery and oil lamp. Hope this helps, sierrafery if you like I can send you a 10 sec clip I took on my...

I will confirm 100% when I get home tonight, but from memory they are on & stay on as soon as the ignition is on and they don`t go out with the rest of the dash lights. I will again confirm that the 3 amigos light up & off with the ignition self test later. I have had the three amigos before so...

Neilly, those are the two lights I have illuminated. I just dont know why they are lit up when evrything else works as it should ? they stay on constantly & brianconwy I`m sure I`ve only ever heard the 3 audible beeps previously when the button has been pressed & it rises into orm? I will...

Hi I am having probs with my off road suspension not working. I have the sls light and off road light lit up on the dash. The off road mode does`nt ping when switch is pressed & I have tried another switch to no avail, checked the fuses & relay and their all good and also checked for continuity...

Well I found the no.1 on the shaft behind the pulley & the front slot that roughly lines up with tdc & rotated the crank back & forth till the timing pin dropped in the hole. Now how important is it that the cylinder heads drained of fuel ? as for the life of me I cant get the pipe off after...

Can someone help me with timing marks please. I`m doing my injector seals & following the d2 forum guide in wich they show 2 coloured links & say there are slots at the back of sprocket. I have the slot at the front of the sprocket & the 2 bronzey coloured links in 2 different places. Could it...

I use mackays in cambridge, as they can cut/fold/weld what you need & I think you get a good discount when you buy by the sheet or 6 metre length. regards, Dan

Those part numbers don`t seem to show the orange cone liked shape of the rubber type valve/diaphram I was referring to :confused:. I gave the parts shown up by those parts numbers a blow through with the compressor. Regard`s, Dan.

Thank`s agian for all your hep I`ll look those up in a bit.

Thank`s Jamesmartin. Mine was opened up in the middle & I suspected it was meant to closed. Do you think this could cause the starting problems Ive experianced ? Also does anyone know where I can source a replacement or the name of the part ? Cheer`s, Dan.

Update. I cleaned all the crud out and removed the calipers to clean the sensors saturday & for the time being the 3 amigos are gone :). I also replaced the fuel filter & took off all the connectors to it for a good clean. Does anyone know if the little orange diaphram type fitting (on the back...

Sorry for the delay in replying. I only recently moved & also have a 3 wk old son, so trying to juggle everything atm. It`s now on 107k so probably best to replace, but I`ll check the front one over first. I have`nt cleared the codes yet & rechecked, but was wondering if the 4134 code (motor...