Search results

Unfortunately my ECU has given up on me and has been diagnosed as unrepairable by ecutesting.com I'm aware there's a little cross compatibility with Discovery ECU's and older models but thats as far as my knowledge reaches. My ECU part number is NNN500020 can you advise what else I can look...

Defender developed this squeal yesterday, wondered if anyone of you could maybe help diagnose? Defender 110 TD5 - 2005

Had a search and couldn't find my answer. Wanting to fit a decat pipe and straight centre pipe to my 2005 110 TD5. I'm a little confused as to what gaskets and/or Olives I need to replace at the same time? Cant find a diagram on google either :confused:

I do, struggling to see how this is associated with that though. This wire runs up and into the headlining? :confused:

Yeah light still comes on even when disconnected. Defender 110 XS 2005

Was out last night trying to diagnose why rear brake light wasn't activating. Turns out the area around where the spade connector connects to the copper strip has corroded slightly and isn't making connection. But I found this cable which runs up the right hand side of the door frame and one...

Got mine all soldered up last night. Thought I'd take a few photos for others to see how they are wired up since I couldn't easily find anything online myself. Pin Numbering: 8 - Illumination 1 - Switch Power Out 2 - Switch Power In 3 - Not Used 10 - Link to Pin 1 (Power for bar indication...

I'll try and get a look tonight. Are these all fed from one source? I'd really like to know why all of them don't work

Anyone know where to poor for this fault? I've now got some carling switches to wire up for accessories and I'm going to need a 12v dash illumination feed for these to light up too

Planning to mount 3x 12" light bars on the 2 sides and rear of my roof rack and undecided if I want to rack/body mount a front light bar. I just wanted to run my thoughts on how to wire these. Plan to run wires up the side of the snorkel, dediciated positive/negative for the front light bar...

None of mine light up, except for the red/orange indicator leds to show the heated seats etc are on. I suppose its not just a simple fix like a fuse?

Could anyone confirm if the switches/buttons on the centre console/dash of a 2005 Defender TD5 are meant to illuminate when my headlights are on? My main dash (speedometer, clock, fuel and temp) all illuminate just fine.

All other door switches are working. It's just my driver door causing problems. Touching wire against the body doesn't work. I don't think it's a grounding problem, more so to do with the wire for the switch. However I've no idea where this runs/connects too?

Cowasaki? :oops:

Spent sometime fitting the DAB aerial and hands free microphone this afternoon. I've used a window mount aerial and fitted it to the passenger side alpine window. I've a friend who had never lost DAB signal with his window mounted one. But back the topic in hand, I've tried multiple red to...

Received my new Sony radio today went to test fit/try today as I need to order a DAB aerial before I fit it properly. But I noticed that my ignition has to be on for the radio to be on? This wasn't the case with the stock radio. I've tried doing a little search but I couldn't find an answer...

Anything you can recommend now cowasaki?

Left my multimeter in the car last night so I've managed to diagnose a little over my lunch break. I have good continuity testing the from the hand brake bracket and door latch bolt, then checked the ground point in the pillar at the switch with the Hand brake bracket and door latch as well and...

Thanks cowaski, I'll have a poke around tonight and report my findings. Hope it isnt a broken wire as it seems like a rather difficult one to replace.

2005 Defender 110 Station Wagon