Search results

Morning I have recently replaced 1 of my sills with box section and repaired some sections of the floor. I have primed and painted everything and used seam sealer in the areas that could trap mud,water etc. My question is how do I protect the paint further? The paint I used was corroless...

Sorry about all the questions What would the green and orange wire be for, Is it the earth for that circuit? Also where is the fuse located, under the dash or under the bonnet? Thanks

Thanks. what would the wires be originally used for? A trailer like I mentioned ?

Evening Gents Whilst in the back of my disco 1 I found a couple of capped off wires. Testing the purple and brown one i have found it's permanent live. What would this have been used for? There is also another purple and brown wire in the back but that's for the interior light. The permanent...

This might be a really silly question! My rear door is delaminated at the bottom due to the hinges sagging and catching on the rear bumper. Once this corona virus is over I'm going to look for another. Will I be able to transport a rear door home in the back of mine? I can't take mine of until I...

Bumping this posted up. Someone must have some old pics knocking about. Do you need to cut part of the floor out? Did people fabricate there own mounts or buy standard? If they fabricated there own what did people do for bushes? Thanks

Afternoon gents Does anyone have any good photos of fitting box section sills preferably on a 3 door? All the old threads pictures seemed to have expired. Thanks :)

The engine temp gets to halfway up the gauge like normal. No perhaps the whole system could do with a flush and refill

Evening chaps I Experiencing a problem with my 300tdi Discovery. When I start the car and let the car get up to temperature the heater is stone cold. Then all of a sudden it will get warm. Then it flutters between cold and warm every few minutes? Any ideas ? Thermostat perhaps?

Spot on. Thank you. The ones I was looking at were far more expensive that getting a complete kit.

I am in the process of changing the A frame ball joint on my 300tdi. I bought a replacent adjustable ball joint with the plan to press the old one out and press the new one in. However on closer inspection it looks as though, the rusty bolts on the ball joint will just shear of when I try to...

Thanks for the replys. Yeh he's a good mechanic. I will try and learn and much as I can off him. I'm a welder fabricator by trade.

Apologies for posting this thread multiple times. I didn’t mean to. The website seemed to be playing up and not refreshing. next minute I have spammed the whole disco forum. Please could a admin delete the others. Thanks

Just to fit

Evening all I have been quoted £300 by a friend to fit the following to my Disco 300TDI as a foreigner. I'm curious to know what I would expect to pay if I went through a garage? Both front wheel bearings Both swivels with seal kit Replace universal joints on front prop Replace A frame joint...

Thanks the plan was to buy 7litres

Thanks the plan was to buy 7litres

Tanks for the reply is it safe to say 80w90 GL4 will do then ? https://www.ebay.co.uk/itm/Comma-EP80W-90-5L-GL4-Gear-Oil-GO45L-API-GL-4/202130607757?hash=item2f0fec4e8d:g:z6oAAOSwCmZZUPTN??

Morning I have been looking at replacing the oil in my axles and transfer box. Im aware that I should use 80w90 but I was getting confused to whether it was I should be using GL-5 or GL-4 ? can anybody advise on which to use? if GL-5 would this stuff be advised? its a good price...