Search results

i'll take a look. the big issue is with access to the top pickup to remove it and drill it, i guess you need to drop the tank somewhat as there is no hatch in the tub to access it.

i'll do a search, the heater came with a pickup but i'd need to drill a hole in the tank or in the fuel pickup at the top of the tank to fit the pickup

Hi there, looking to fit a diesel heater and need to a take a feed from the main tank, yes i could t-piece it but is the pipe shown circled in blue on the picture below a take-off, say for an optional heater, or is it a breather. it appears to be blanked off on mine and all the spares...

i lied, they are wowled! not Colight

Good idea, i've got a spare fusebox somewhere, just need some grommets to seal the battery box as mine appear to have gone awol over the years.. impressive looking job there!!

some from Amazon, Colight i think, though i'm dubious on how good they will be

Good plan, I'll see if I can do that. Need some more grommets for the battery box as well

Hi hive mind, i've just fitted a bumper bar and 2x72W LED spotlights to my 300tdi 110 , i've got a relay and all the fuses etc. for wiring them in but looking for a good permanent live in the engine bay to tap of rather than having to run a wire back to the battery. any good ideas on where to...

hi, yes it is , i am just outside wolverhampton but can post at your cost no problem. cheers

Perfect! i don't mind paying more if they last longer - https://maltings4x4store.co.uk/differentials/corteco-front-and-rear-diff-pinion-seal-ftc5258/ and i'll watch that video thankyou

Hi there, i've got a bit of a leak from the rear diff on my 1997 Defender 110 300tdi and would like the replace the seal. is this a straightforward DIY job on the drive or more of a specialist job. Also do people normally just change the seal or change the flange as well? i've seen this kit...

still for sale

I don't think mine is knackered though i haven't tested it fully, i did get lots of clanks from the rear end when travelling,turns out it was the hinged rear spare wheel carrier, strip down and new washers fixed that and it sounds a 100% better now, like a new car (well nearly!!) but i will test...

got it!! with the wheels off the ground i assume?

evening all. how can you tell when this is knackered? i get lots of bangs from the rear end and some clunks when pulling away, i suspect its the A frame but when i get underneath everything seems tight with no play? should i check with the weight of the axle??

Ah i see, i'm glad its not just me that thinks this. i'm also going to change the airfilter to a standard one and see if that makes a difference. i'm not dissatisfied with it at all and to be honest if it gives a bit more mpg as i'm driving it more sensibly then thats a win win in my book cheers

One thing i've noticed , and it might just be me, is that before i fitted the snorkel i would get quite a bit of black smoke from the exhaust, particularly when clogging it, suggesting running a bit over fuelled, since fitting the snorkel this seems to have got much less but the engine doesn't...

Hi there, have bought a 300tdi service kit which includes an air filter so went to check how to change it today and found its got a K&N already, which probably needs a clean anyway , so not sure whether to stick with it or put the stock one back in. as far as i can tell everything on the engine...

i found this, but its on the air filter lid at the bottom, i assume as a one way valve to let water out.

yeah i#ve seen the kits on gwyn lewis, they look like a good idea. i'm still in two minds about the badges