Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. MJI

    Disco 2 Need new fob, what are my options

    I was used to immobiliser chips hence the question . Will try one last reflow first. Other thing of worry is seeing fobs removed from list . Both of mine were refurbished as well. Nice new switches. Those are the most common ones i have seen.
  2. MJI

    Disco 2 Need new fob, what are my options

    One seems to be well knackered, almost like it was EMPed. So I need a new one. What is the best course I have? Got a Hawkeye. Where is the immobiliser chip? Can I reuse a second hand one, once reswitched?
  3. MJI

    Disco 2 Keyfob dead, any ideas

    BTW I drop new switches on these as a matter of course.
  4. MJI

    Disco 2 Keyfob dead, any ideas

    My plan is to buy a couple off Ebay, refurbish and get them coded to my D2. Is this workable, what kit do I need? Can a D2 recognise 3 fobs so I could not lose my working one? If nanocom required, any near me? Will read ACE codes with my Hawkeye if required.
  5. MJI

    Disco 2 Keyfob dead, any ideas

    How easy is it to code a new fob PCB with Hawkeye?
  6. MJI

    Disco 2 Keyfob dead, any ideas

    Of course, no broken tracks, nothing I can see dislodged. Other key is OK. Cleaned with IPA,, mechanically looks fine, only have a reflow left to try.
  7. MJI

    Disco 2 Keyfob dead, any ideas

    Battery good, switches good, what else can fail?
  8. MJI

    intermittent ACE warning light.

    I thoight filter bit obvious, fuse box good call
  9. MJI

    intermittent ACE warning light.

    Then check Over the old one dry joints and the like
  10. MJI

    intermittent ACE warning light.

    Two things come to mind. Pressure sensor, monitor it, will bring up faults. But I think it may be worth getting a spare ECU. I think the drivers for the solenoids start to fail.
  11. MJI

    D4 - Are they worth the risk?

    Ford who are not good engine designers compared to other companies. And almost certainly things like emmisions and fuel consumption cause running at the thinner end of recommendations. That said I had one car, Esso 20-50 fine, other brands, burnt it. So even though I could get a decent 20-50 I...
  12. MJI

    D4 - Are they worth the risk?

    TD5 does not either
  13. MJI

    Disco 2 Head lining loose

    Had it out 9 years ago to repair the drain. Had help then, now moved out.
  14. MJI

    Disco 2 Head lining loose

    Expensive year this year then. Will have to go to agreed value.
  15. MJI

    Disco 2 Head lining loose

    Sagging down in a couple of places, above the windscreen , and above me. Other side is squishy, but not falling. What is best repair please?
  16. MJI

    Injector puller tool

    Levers out the injectors so new washers can be fitted. Push short end under the injector pump body, and pop them out. Quick way on the Disco 2
  17. MJI

    Injector puller tool

    Allen Key?
  18. MJI

    Copying ECU maps between vehicles

    I may go s2 if i can get hold of a v8 tc, but chassis comes first
  19. MJI

    Copying ECU maps between vehicles

    Begin with D? If so. No idea what happened but they were good remaps, then went down the pan. As to wiping it, depends, if about 5 years ago or older, should be fine.
Back
Top