Search results

Awesome I'll check em out. Ty

Changed out my injectors 3 so far 1 broken clamp and bent and 2 that showed a little high on leak test previous but Still chasing a little judder under load so wondered is there any app or diiag kit that would show live data ??? Yes I know I should have thrown a clean set of 6 at it but that...

Using the same panel in the camper Was dubious but was too cheap not to try and swear it keeps it topped up just right never a problem. Wish they still had em as would get one on the beast too

1st one is the clamp 2nd is the bolt I did find that bolt on Realoem and it looked 'right' bit the description cam cover threw me off a bit. BMW Bolt 11120036237 Clamp 13537787215 Nut M6. 13537801713 Thanks again.

awsome thankyou gives me summat to search on I'll have a scan about for lrcat too. Cheers

I know this is a dead thread. Sorry. Anyone have the part number for the studs ? Landover /rover/ BMW. ? Got a broken clamp and 2 bent ones. Looked at realoem and it's not showing with the clamp. Albeit there is one showing on rocker cover that looks like it but didn't wanna order the wrong thing

When I got mine I told the Mrs she could bury me in mine as I loved it. Didn't realise it was gonna be the death of me already. Lol. Know the feeling

Having had the recent rotten clip snap and boost pipe pop off I did some digging. I knew FIRST LINE supplied clips that style from past experience so hit the webcat and started checking out specs from what I struggled to measure. Came across 3 that were the right diameter and pinch. FHC...

I should hope not (got 3gig storage on here lol) Been through it on phone and laptop and through menu and files. (definitely only V8) AHH ok. I shall have to look about a bit further away then. Ty

I use the standard menu on Mrs laptop when sat in house. But downloaded the pdf's to my phone so I can use as reference etc. @backinblack. Damn That's the stuff I'm after. Missing all those workshop (td6) options

Got me rave loaded up and typical want the cooking system TD6. every bit I look at in workshop manual is listed for V8 only. An I missing a file ?

A sheltered life led not having experienced the expense and heartache of having to save every last penny to ......... You were on about tools weren't you ?

Dont know if it will help but is your Speedo all ok ? Sounds identical to how mine behaved while driving without my speedo when it was off for repair. Before I get aggro I rigged up a torque app Speedo from obd and a back up gps signal although didn't stop me running out of fuel ☺️

After realising my leak off tester kit has been vultured and half of it missing I've ordered a new one. Just been rummaging for my block tester and found it. With empty bottle of fluid. Back to the order basket then Never lend ya tools out. Ever.

Not looking good. Charged up while I sorted camper (back up) Fired up all good. Water tank empty so filled her up turned on fans waited for it to warm up. Bit of whispy white out the exhaust and bottles bubbling away getting air out. Put top on and gauge starting to move 1/3 maybe. I swear...

I'm alive let's see if it's been a dream I know ya right start easy work up. First plan get drive clear and sort out work travel and get charger on etc. It's not going anywhere til I know it's ok. Not risking it

Been getting an engine wobble like a mild misfire Intermittently on tickover and at 50-60mph. Sports mode revs rise and drives through it. But black smoke on acceleration at times but worked out likely the injectors need an overhaul. So that's next job But today replaced rear door light bulb...

Found a possible from first line: FHC2002 70mm to 66mm FHC2008 71mm to 64mm FHC2011 71MM to 66mm (Packs of 5). But add S at the end for a single (have trade contact looking at orders but there's an eBay seller doing all of em singles and packs) Anyone got decent clear access to an intercooler...

Good luck mojo fella. Hope ya sort it

As above Tappets hydrauliced out. Have they had chance to refill with oil yet ? Timing out 180 ? U said checked marks etc but maybe worth refitting it from start Always lapped valves in new all round especially as you don't know wether seats and valves are machined to match to start with Had...