Search results

:D:D:D

Thanks for that info. Watched a video on You Tube posted by Atlantic British regarding fitting the new modification. It appears that the original sump & filter is one unit. When the sump bolts are removed, the sump is lowered slightly and this allows for a hacksaw blade to be inserted in the gap...

Just removed the glass. I found out the hard way about the rear screw which holds the lock barrel as I removed the screw completely and when I removed the barrel, the plastic handle base dropped into the door cavity with, I discovered, a metal cover. Despite fishing around with a magnetic gizmo...

Just had a read of the procedure shown in the link you sent me...looks like the way I shall do it. I will measure how much is removed, plus how much comes out when I remove the sump plug before I replace the filter/new sump unit. I like his refill gizmo, it's a variation on the Gunson...

Thanks Bud for that. Going for Mannol ATF AG55 (10 Litres). I use Mannol 5-30 Synthetic in the engine and am happy with the quality, plus it meets the API spec's. Hope your keeping well. Hi Lynall...from what I have read, the "Surging" and judder is down to fluid deterioration and is quite a...

Replaced the front l.h. one this weekend on my Disco 3 as it wouldn't unlock unless the button on the dash was repeatedly pressed-I also suspected the unlock motor was faulty. Yes, it is a fiddly job, especially getting access to the rear glass clip on the regulator which has to be released...

Hi Guys.....I think it's about time that the auto transmission is due for an oil & filter change (6 Speed) on a TDV6. I am looking at fitting a quick change kit with a metal sump pan and also giving it a dose of Dr Tranny additive as I am getting slight vibration at around 1500/2000 r.p.m...

Hi guys..Still in France and the front passenger door lock on my 2008, TDV6, Disco, HSE has started playing up over the past week by failing to unlock from the keyfob. I have been able to unlock it with the switch on the dash no problem. However, today it has become what appears to be...

Hi guys..Still in France and the front passenger door lock on my 2008, TDV6, Disco, HSE has started playing up over the past week by failing to unlock from the keyfob. I have been able to unlock it with the switch on the dash no problem. However, today it has become what appears to be...

Member Since: 15 Sep 2017 Location: Bryngwran, Holyhead Posts: 37 Also on display when engine running is “System fault-Special programmes off & Special programmes not available” Have disconnected battery for 5 minutes with no change. This is a fault that I have never encountered before...

HELP ******* Disco 3, TDV6, 2008, Auto Hi guys....in France at the moment. Car has been going fine until this evening. Just started it to drive away and a capital F is on the display with the message “Transmission fault, not all gears available”. Gearstick is stuck in Park and can’t be moved...

I have a Haynes manual and they state "With an unladen vehicle, full tank and at normal height" Air Suspension: : Front Toe 10' Plus/Minus 12' (Total) Rear Toe 14' Plus/Minus 8' (Total) My LR Handbook gives,-no mention of Tight Tolerance Mode or ride height etc.: IMPERIAL Front Toe...

Hi Guys.... 2008, Disco 3, HSE, TDV6, Auto with Air Suspension Does anyone have the LR spec's for the Wheel alignment (Front & Rear) ? Had the wheel alignment done on a 4 Wheel, Hunter setup last week and the following figures were given after adjustments, which were done in Tight Tolerance...

Almost Done... Rear calipers bled and flushed with new fluid then rain stopped play for an hour :eek:. When the rain stopped, I did the front's, the old fluid was a lot darker than the new stuff (Pagid DOT 4). On to the next job which was to torque the driveshaft nuts and stake them, decided to...

Could have done with one this afternoon :eek: !! Got stuck in this morning, all the nearside bolts Torqued up , Parking Brake shoes refitted & adjusted, refurbed caliper & pads fitted. All set to bleed the brakes and change the brake fluid and it started pi**ing down rain. Not looking very good...

Like the idea of a gazebo as North Wales is well known for the changeable weather !! I have a pressure bleeder and whilst I have to do the rears where I serviced the calipers and replaced flexy & solid brake lines, I thought it a good idea to flush and bleed all round as I have almost a full...

Plenty of it !!!:D

UPDATE Hi Guys....Alright for some to have a day off !!! :p Parking Brake back plates came this morning so round the garage to finally be able to press the wheel hubs into the swivel. Fitted the swivel to the Offside first then jacked the suspension up to 485mm from driveshaft centre line to...

No way I would even think like that Bud...Always open to any comments or input, that,s the whole idea of this forum.:) Er Indoors needed some shopping so the schedule is running late today :eek: Must get the N/S arms on this afternoon then busy day again tomorrow with the swivels, handbrake...