Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. JohnnyCrash

    Went with a BANG!!

    That is wishful thinking lol just read that you can't skim the M51 head? is this correct? Is it just a case of send head to be crack tested until you find a good one??
  2. JohnnyCrash

    Went with a BANG!!

    Thanks, I think the cooling system should not be under this amount of pressure. I will post up what the leak down tester shows
  3. JohnnyCrash

    Went with a BANG!!

    Yes, I've had the top of the rad crack before, replaced my rad around 2 years ago due to a hairline crack along the top plastic. This time however it's gone with a lot more force so I'm suspecting something more sinister like exhaust gas entering the cooling system causing excess pressure and...
  4. JohnnyCrash

    Went with a BANG!!

    no idea yet, just closed the bonnet and went inside lol
  5. JohnnyCrash

    Went with a BANG!!

    So after a drive from St Helens to Manchester, I reverse onto my drive and I am stood at the passenger door getting my things when I hear a bang, sounded like someone dropped an empty oil drum! followed by a cloud of steam :mad: wanna see?? of course you do lol...
  6. JohnnyCrash

    Second hand ECM and nano

    Take EMS code (2780) from here Change here... Remove ignition key and then replace key and should start :-)
  7. JohnnyCrash

    Second hand ECM and nano

    Sorted will post pics how too
  8. JohnnyCrash

    Second hand ECM and nano

    Diesel and yes I have a Nanocom
  9. JohnnyCrash

    Second hand ECM and nano

    Ok, so in the post arrived my ECM (second hand) it fits, just need a guide how to program it to the car using the Nanocom
  10. JohnnyCrash

    Help and advice needed

    check the in tank pump, if it's fecked or on it's way the performance is compromised. should have no issues at all getting to 60?? so something is not right
  11. JohnnyCrash

    Tool LRT-12-118

    that's the end made now to have a rummage through the scrap bin for something I can weld on as a handle ;)
  12. JohnnyCrash

    Tool LRT-12-118

    Fantastic Thank you :-)
  13. JohnnyCrash

    Tool LRT-12-118

    better than gripping the shaft with mole grips and then moaning on here it no longer fits :D:D:D:D
  14. JohnnyCrash

    Tool LRT-12-118

    what's the ID? and thickness of the gap for woodruff? rest is just a bar welded on
  15. JohnnyCrash

    Tool LRT-12-118

    anyone have the dimensions for this tool??
  16. JohnnyCrash

    thor engine experts please

    +1 Mozz is a decent guy, quick thinking and makes a brew before you even realise you need one!!
  17. JohnnyCrash

    Ecm

    Not at all, was just asking or guess looking for an easier solution Original one is off to Rick the pick
  18. JohnnyCrash

    Ecm

    can I not just modify the connector on the loom to take the other ECM as I don't have the EGR connected?? or would this just be too simple??
  19. JohnnyCrash

    Ecm

    think I'll look for a second hand one :D
  20. JohnnyCrash

    Ecm

    ordered 2 you never know when you need a spare :p:p:p:p
Back
Top