Search results

After my recent overheating issue, one the part I'm changing just in case is the thermostat. I've just gone for an aftermarket one. I was disappointed that I couldn't get one that operates at a lower temperature without buying something like this aluminium cased one for £400. Also it's out of...

The steel seal stuff that others have mentioned has a similar consistency to water, and only cures if exposed to hot gases, so if it gets into narrow passages it shouldn't react or cause any blockages. I've got a vacuum and pressure testing kit arriving today, so I'm going to see if I can find...

Yes it was low speed. Probably 25mph up a slight hill (a lot of 20mph zones around me). It was also only about half a mile from a 5 minute stop where I picked up my kid form nursery, so the engine shouldn't have been that hot to start with (unless it overheated on the way to nursery and I didn't...

I checked this the other day and it was clear.

This may be true, but if I do have the heads off, I was as well go a step further and get the rear main seal done. Thanks.

Ok, so I think my head gasket on my MY2000 P38 4.0 V8 has gone. :( I've had the car about a year, and in that time, the temp needle has never gone beyond half way. I noticed about 2 weeks ago my expansion tank was almost empty. I assumed I just hadn't been checking it, so topped it up and...

COuldn't find it in CPC, but Farnell seem to have them. https://uk.farnell.com/amphenol-piher-sensorscontrols/pt15nv02-103a2020-pm-e-s/trimmer-10k-0-25w-1turn/dp/3128536 Notes so I don't forget I think V02 is the correct mount E option is the long life option It's an N rotor as G is on 11 weeks...

Might buy a handful of these potentiometers just have handy when I start pulling things apart. https://www.conrad.com/p/piher-pt15nv02-103a2020-s-trimmer-linear-025-w-10-k-270-1-pcs-432024 I noticed here: http://www.stockholmviews.com/p38/index.html#hevac it mentions that there are two...

I get the book symbol often on my HVAC. If I leave both sides in LO, then the book doesn't appear. I can change the distribution buttons with no issue. When the book symbol comes on, it disappears after a restart, so I believe the motors are all winding back to their start position correctly...

my window is now working. I don't have a NanoCom and the rsw diagnostics I use doesn't work monitor windows si it was trial and error. Luckily, the first thing I checked was the problem. It was the switches pack (thanks DataTek for suggesting I start here). I pulled the board out, and before...

I'm about to start diagnosing why my passenger electric window isn't working. I figure it's either the wiring, center switch pack, motor or the computer box thing behind the door card. To save me some time, does anyone have some tips, or order to check things in. I assume the switches are all...

I remember taking my old, but new to me Lexus to KwikFit for an MOT. Passed no problem, but they failed to notice that half of the exhaust rubbers were missing, so a few months on the exhaust snapped in half on me. Would have rather had a fail for such a quick and easy fix.

Surely a P38 must be the least stolen car. It's 50/50 whether you can get around the security system even if you are the owner with the original keys.

At what age do the usual classic car insurance companies consider something like a P38 to be a classic. When I tried to get a quote for my MY2000 I just got a response saying they couldn't quote me. No reason why.

My money would be on the rear main seal unless there's visible oil higher up the engine. What grade oil are you using. If it is the rear main seal, then using 20W-50 won't hurt and may slow it down enough to live with whilst you find time to sort it.

You do have one of the better colours though. I bought green as it was mechanical sound but was ideally looking for blue. But the colour has grown on me a lot.

I think Hurricanes are by far the nicer looking Alloy. Comets look a bit chavy And the Modials look like they have come of a cheap plastic Ferrari toy car. Sorry if I've insulted somebody's wheels. We all have different tastes.

With my daylight running lights enabled the tail lights are also permanently on. It's only the dash and side light that aren't on.

BEMC immobiliser and EKA disabled. Daytime running lights switched on Arnott 3 bags (a little stiff at road height in my view, but fine in off road position) High lift cam in the V8 Top hat liners all interior bulbs are LEDs Everything else is standard

I've wondered this for a while. My 2006 Lexus is the same. I know car windows (I assume the P38 is the same) monitors the current draw of the motor, so if it reaches the end of travel, or you leave your arm in the hole, it detects the change in current draw and then stops the motor. I suspect...