Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. ratty

    Need help please

    James Bond smoke screen grey in colour or just a small amount and black.
  2. ratty

    Need help please

    Let it tick over for 15 mins and make sure it's running smoothly before setting off. Don't forget to report back before moving too. We're you towed to the services or fit it cut out in them?
  3. ratty

    Need help please

    Yes if the fuel pressure is high enough
  4. ratty

    Need help please

    While its cranking make sure the Rev counter rises to between 200 to 300 rpm
  5. ratty

    Need help please

    Wait for the management light to stop flashing (about 5 mins) deck the throttle pedal to the floor and crank it over. If it doesn't start within 20-30 seconds stop cranking.
  6. ratty

    Need help please

    Leave the ignition key exactly where it is and pump the accelerator to the floor and back up 5 times in a row. The engine management light should start flashing. Re-check the tank for vibrations. If there are none try hitting the bottom of the tank with the flat of your hand and the check...
  7. ratty

    Need help please

    Turn the ignition on so the dashboard lights come on. DO NOT TRY AND CRANK THE ENGINE OVER. lay under the vehicle and put your fingers on the fuel tank. Can you feel a vibration coming from it?
  8. ratty

    Need help please

    Rear of the engine bay to the right hand side of the big black plastic cover that sits on the top of the engine. It will be a black plastic object with a black rubber cap and 2 wires coming out of the bottom of it. Push on the black rubber cap and see if it goes click
  9. ratty

    Need help please

    In which case the fuel pump should be working. Can you hear it whirring now? The inertia switch is bolted to the back of the engine bay between the turbo and abs block about 4-6 inches below the gutter level
  10. ratty

    Need help please

    Give the relays in the engine bay fuse box a wiggle and the see if you can hear the fuel pump work. You can also press the rubber covered inertia switch which is attached to the bulkhead in the engine bay to make sure it hasn't tripped.
  11. ratty

    Welcome to the refurbished LandyZone

    Yes you can. You ain't getting em but you can request em. :D:D:D I believe smileys will be imported in due course. :cool:
  12. ratty

    Need help please

    Is the vehicle broken down on the roadside or is it at home?
  13. ratty

    Need help please

    Also check the fuel pump relay connection, inertia switch hasn't tripped or the connector fallen off it. Is there any oil in the red Ecu plug?
  14. ratty

    Welcome to the refurbished LandyZone

    That was very naughty of you. :eek::D
  15. ratty

    Welcome to the refurbished LandyZone

    TIPTOE..........TIPTOE..........TIPTOE...........TIPTOE.............. Click!!!!:eek::eek::eek::oops:
  16. ratty

    Welcome to the refurbished LandyZone

    When?........ And what are you doing out of your wheel?:eek::p
  17. ratty

    Welcome to the refurbished LandyZone

    SNIFFLE!! SNIFFLE!! I got shouted at...... SNIFFFFFFF...
  18. ratty

    Welcome to the refurbished LandyZone

    STAMP STAMP STAMP STAMP...... SLAM!!!!!:oops::(:(:(
  19. ratty

    Welcome to the refurbished LandyZone

    I wuz only trying to help:oops::oops::oops:
  20. ratty

    Welcome to the refurbished LandyZone

    Howzat?:D:D:D
Back
Top