Search results

Good spot :)

Thought i'd sent you this before... Please please please use a relay, fuse and correct wire :) Replace 'Aux Lights' with 'Heated Seats'

I had same problem with mine. I bought new barrels... Same thing with those too. So I removed the barrels completely, popped a bolt in the hole and have a plastic grommet type thing covering the bolt. I fitted central locking so rely solely on that. I also removed the inside door catch/popper

Literally just 'snaps' over the lip inside. Have a look here and it shows you with some good pics and explanation; http://www.defendoor.co.uk The one I looked at this weekend, had a cable attached to the fuel cap somehow so the defendoor is still attached when unclipped (he said he put this on...

Hi all, I'm about to buy a defendoor fuel cap cover thingy (saw one in a carpark and had to wait for the guy to come back and ask about it). I was going to get a plain black one. They are £7.90 each or you can save a quid if you buy 3. Anybody want the 2nd and 3rd (I will post for free)? If...

I had mine remapped at 152,000 miles. No problems...yet :)

Welcome I'm not far so will see you about no doubt. Don't forget to wave :)

Ha. We should just swap cars then :) Why are you doing away with it?

Ha. Just found pin outs Ta

Hi guys and gals, I have fitted a switch on my rear door (same as those found on the fronts). I want it to operate the interior lights and also be part of the 10AS alarm. Anybody know where I need to cable back to? I'm guessing the 10AS, so has anybody got the pin outs for it? Ta muchly

Mines a 2001 so that's early I think. I don't have holes for them or nuffink. I have one each side in the headlining. Will take a pic later as it's actually quite a good place for them. When I get further down my todo list to 'audio upgrade', I'll be adding another set above the rear windows...

Damn it. Mine are above my head unfortunately so not great access :) Thank you anyway

:( I don't have a speaker there

Same, mine runs out at beginning of December so would be interested in a quote

Ok ta, I will go and see how the binnacle comes off

Hi all Next job on my list is to sort some central locking issues. What's the easiest way to access the 10AS module? I need to remove it completely to solder a relay on the board. Cheers in advance and sorry if it's been explained before, my search didn't show anything specific 2001 90 Ta

Replaced the front door seals/rubbers. Oil, filters and rocker cover gasket change. Topped up the clutch fluid and coolant too. A productive couple of hours :)

You can either connect your hawk central locking to the 10as or you can bypass the hawk control unit and fit the actuators to the as10 directly. This is what I'm doing. But, my 10as is the 'budget' version so bought a kit off eBay to add the required relay etc

As above. Thought I'd try my luck. Cheers