Search results

She looks lovely!

Today saw me replacing the rear radius arm bushes May do the a frame bushes and ball joint tomorrow if I have enough bothered and don’t ache too much!

I have Britpart standard height springs and their yellow gas shocks on my 90. When I fitted them, I also fitted the rubber spring isolators to the top of the springs. I’m really pleased with how it rides. I do all my work on my drive with no special tools. Nothing tricky about it but ensure...

Lubed my air con Fitted a pair of cheap led spot / flood lights on my bumper (second attempt at this as the first lights I fitted turned out to be ****e!!) And removed the door tops so I could drive around basking in the glorious sunshine!

No the spare wheel holds the bonnet down!! :D:D

Just these on mine... Nothing inside the engine bay at all

Both the S1 and Rangie are great! I know which one I’d prefer (hint.....it ain’t got a roof!!) but looking forward to the RR progress!

It’s great bolting clean and shiny bits on! Looking good

That’s a great back story! Keep us updated with your progress. Everyone loves a series!

I’ve never failed using the method above. On occasion I have had to cut the outer sleeve twice (opposite each other) but it’s always worked. Good call re poly bushes!

Just fitted the britpart poly bushes to my front radius arms......easier than expected and handling is great! To get the old ones out, drill the rubber bit (chain drill around it) to release the inner sleeve. Then use a hack saw to slit the outer sleeve. It should then be easy to knock it out of...

This is a great Landy! I like it very much!

Deffo galv

I found my radius arm bush completely collapsed and there was no indication at all. I found it by accident, really. I replaced the radius arm bushes both sides with Britpart poly ones and the handling is now taught and predictable. I bought the kit last year but never got round to fitting them...

Yeah I’d guess at side lights as well. My driving lights have them too.

This puter isn't showing images but I imagine the other 2 wires are for glow plugs and oil pressure.... Actually, there should also be a wire for the stop solenoid on the I.P. Cant remember the colours of any of them though......tis late!!!!

Serial number... https://www.shop4autoparts.net/technical-info/LT230-Transfer-Box-R-Type-T-Type/ Dunno what diff combinations are available to change axle ratios. I’m assuming you have verified the speedo reading with gps?

It should do more than 55 whatever transfer box is fitted I would have thought.... For top end speed though, a disco transfer box has a 1.2:1 ratio which is the highest geared, standard transfer box. There should be a label on the box, visible from below, which will tell you what ratio it is...

I use M10 threaded bar for the guide studs but don’t let the transfer box hang on them.

Working alone, I use this..... It bolts to the inspection cover and provides a flat surface for the trolley jack to work on. Similar could be made from wood.... If I have a helper, it can be mauled around quite easily. It’s not particularly heavy but it is an awkward, unbalanced thing to lift...