Search results

+1 on the dodgy connection, if the car isn't moving it isn't picking up a signal that could alter voltage. Check the connections and the cable from the sensor upwards....

It's been a while since I posted this, but I have finally fixed it. I have just replaced the front axle ball joints - top and bottom. There must have been just enough play in them to start off the vibration which very quickly got worse and could only be stopped by braking and slowing down. I...

I am just about to do this too, the ball joints have arrived, but not the press tool....... I believe that it is a tough job. I would imagine that alignment will be straightforward as long as the balljoints are pressed home completely.

I use Island 4x4, they have been very good in all respects, particularly delivery speed and communication. Prices are good too.

Ah right, I only remember the days when it was a big 24 Volt battery!

I thought that HGV batteries were 24 volt! Connecting one of those up would fry your electrics! Unless of course some HGVs have 12 volt versions........

if you take a picture of the engine bay and post it on here, someone will tell you straight away.

My worst job was changing the transfer box, I thought it would take a couple of hours or so..... 7 hours later........

I ended up replacing the OBD socket, but not with one from the same year. I went to a local scrap yard, bought a couple of different ones from newer cars and made one up with the right pins for the P38. Connection was great from then on. You could have damaged your OBD lead from the Lynx I...

Are your plug leads all in the correct sequence? Check under the bonnet in the dark for arcing, check the spark plug by substitution etc....

When you say it is overheating, is it actually overheating and throwing steam / water out, pipes under great pressure etc... OR is the needle on the dashboard saying that it is overheating?

Colin, the picture doesn't really show his (Oscar's) size, but of course the paws give it away - he is huge!, mum was a labrador, dad was a giant poodle making him an F1 Labradoodle. He turns 2 at the beginning of December and has at times been absolutely bonkers! He has calmed down now...

Better join in then, here's my dog Paul

Ordered mine this morning, had confirmation from Colin's "Admin Angels" Looking forward to interrogating the systems on the RR....... What a great offer from Colin at BBS, thanks again.

I have just managed to get an Avic 500 via eBay, just waiting for it to arrive then I'm going to fit it, I thought it did the lot too! My radio has just died off, so I thought it was a good time to do the conversion. I have a separate Garmin SATNAV at the moment which is mounted in the coin...

Sorry guys, just noticed my "Typo", it should read 255 55 18 The speed rating is what is on the tyres already, 186 MPH is probably a little excessive, perhaps the last owner had delusions about the top speed achievable! I will have a loo for the AT version, I had assumed that the AT2 was the...

Mine has has the 18" hurricane wheels and needs: 225 - 55 - 28 - 109 - Y I can't seem to find anyone who does the AT2s in that size?

Parisien Please feel free to start the post on General, I'll be happy to join in. Regards Paul

My P38 is just about due new tyres, they are currently what I would call road tyres. I live in a rural area which is high enough to get plenty of snow when it comes down. Earlier in the year when we got the last decent snowfall, I was heading home along a very dark lane with snow going...

Ah, I'll check the one on the oil cooler then. I seem to remember that it is easily accessible.......