Search results

Jason 101 Jason 130 Near Hexham. Basic Recovery equipment. Slings.Straps Shackles.tow pole Good selection of hand tools Jack's Axl stands. Local knowledge. Access to Accomadation. Close to railway Stations Airport Basic Generic code reader. Access to Garage weekdays. 25 mile Radius.

All sorted now! Thanks lads for checking on me! The poor lad got a sharp lesson on loading a loaded trailer!

Also have a trailer on with a S3 on it!

Just had the recovery company on that promises to pick us up three hours ago and they reckon they will have me in 20 minutes! I will let you know if they show!

Hi BB. It's 300tdi Disco and it's broken a rear radius arm!

Been sat here since 8pm.no sign of recovery company or highways agency! Anyone about!

Down in Knutsford and one of my rear radius arms has decided to separate from the chassis! Does anyone know where I could get two and some bushes around Manchester in the morning! Need to get the old girl and the trailer with the other old girl home on Sunday!

Stuck on the M6!

I found a patent part for £166 from ribble valley 4x4

Just changed the coolant and the water pump on mine and replaced the hose from the coolant tank! The bastard steel pipe has split at the bracket so now onto look for one of those! But not really wanting to pay Landrover £220, anybody breaking a TD5

You can use a 14 mm Socket or spanner on them little nuts! Just up on corner and the shaft will turn as you rotate the raised wheel!use an axle stand as well please!

I use 10/40 and an annual service and it runs fine!

Does anyone have a decent usable stage one chassis and Bulkhead? Thanks

Well it depends how you use it! It's a nice vehicle! I'd have one any day! Do you need a ramp for repairing or just to take a look at the tank? I just use a pair of ramp or axle stands! A pain in the back!

Hi Dervpower I have a discovery td5 a freelander td4 and I've just bought a Stage one but it's a long way of from being on the road. At the moment I'm working on my friends 90 putting a new back quarter chassis on. And we are planning on a bit of a tour round Europe next year

I like there pro range! I also have a set of flex head ratchet spanners and they are great! Also had a 3/8 socket set. Again got on offer for 20 quid but it was great too!

What's the problem then?

Best to try what you have! Connect it up and then test it working with a meter! Make sure the lights and sterring are working! If you look in the connector on the loom side you will probably find they are only two wires in the plug!

Ok thanks! I had it in my mind that they where different! But could not remember exactly how! Will be on the lookout for a chassis for a Stage one

Hi all! Will a s3 chassis swap out for stage one chassis? Hopefully it will be the same.