Search results

Suggest you clean and check the small Lucar connection to the starter motor. Small single (brown?) wire next to the gurt big battery connection under the front right hand side of the engine.

Suggest you get yourself a copy of Rave if you haven't already. The anti roll bar link (the thin bar with the joint at each end) should be attached to the axle not waggling about in the breeze.

1) Read and post here: 2) Ask nicely here: :)

Just done this in mine :)

Looks like we were both right - that's a first for me! :)

Looking at easy fixes; it might be worth checking the small wire on the starter motor is connected properly. It's called the Lucar connector in Rave, brown lead with a red trace.

Voted! Good luck.

I had a days off road training at Northolt which is a bit nearer to you than Scotland. It was a present and I can't remember exactly which company it was but after a quick Google of "Land Rover Off Road Northolt" I think it was this one: All Terrain Services. The instructor knew his stuff, I...

Thanks for the tips on removing the carpet

Thanks v much - how does the trim that runs parallel to the rear bumper come off?

Might check under the rear carpet of mine - once you'd got the side bins out was it easy to get the carpet up?

Used me new tyres :)

Turned out to be a dodgy connection on the starter motor - the little Lucas connector lead, not the gurt big one

So to complete the story: On Saturday morning we pulled up in the local fuel station mini supermarket, tried to restart the Disco and whilst I had lights, fuel, could hear the fuel pump and various relays clicking and whirring the starter motor wasn't turning over. Turned it all off and on again...

Thanks all and mhm, think you could be right. Just tried it again and it started. All ok for now.

Thanks what's ckp please?

Disco 2 manual Stuck in a fuel station wont start tried jumping it have got lights and fuel but wont turm over any ideas please?

Is a gear box cooler only fitted to autos? Mine's manual and I don't think I have a gear box cooler

Hi Mike. You need to remove the intercooler to remove the radiator. Have you got a copy of Rave? I did mine using that and it wasn't too bad to do. The pipe in the photo of your other thread looked more like a power steering or air con pipe, if I recall correctly the pipes on the rad and...

Sorry, think it was 32 mm but I can't be certain. I bought one of these socket sets for a bit under £40. Not top class quality but fine for the job.