I have this problem on a model 72736, will unwind cable and compressor works fine but will not recoil cable on to spool.Same fault??

I found if I closed the drivers door it would connect, had to replace the BCU as it was faulty. HTH Just need to set the plips now others wise all fine

managed to get Hawkeye to connect to BCU but can't view EKA all can do is unable/disable.Can't clear the flashing B and m and s warning lights :mad:

have tried entering EKA code 6 times, vehicle does not seem to respond to the key actions BCU knackered ??

Have fitted new fuse box as old one full of water.When I switch ignition on get audible beeping and a flashing m and s light and a flashing B with a line through it.Car will not start and no windows open or central locking. The Hawkeye works OK except does not see the BCU, keeps asking to check...

have had similar to this with also flash m s symbols. Fitted new fuse box as old one full of water, switched ignition on for 5 mins to allow bcu and idm to communicate as per manual. Still does not work . I thought is was bcu at first, still getting all these problems that i had when old fuse...

Having problems when switched on they will not go off, have to disconnect battery. Have had bcu probs as well but sorted them, but when I reconnected battery they came back. Any help please..I have a Hawkeye to use..Thanks :confused: