My 92 200tdi Defender has the original engine. Recently replaced the thermostat with a new one that was rated at 88 C. The engine is now running hotter than it always has previously. I’ve checked and some people are saying the 200tdi should have an 82 C thermostat yet other suppliers insist the...

Finally got the old Modular’s off my 110 & replaced with heavy duty Wolf wheels

Loaded a couple of spades inot the back and spent a couple of hours digging trenches from our flooded lane across verges to ditches to allow the water to drain away. Doing our local councils job for them. Hoping for a council tax rebate.

I got fed up of not being able to see my defender gauges / speedo with standard bulbs & upgraded to these. No issues so far & an amazing difference. Qasim 10x T10 W5W LED Bulbs 5SMD 501 194 168 5050 Chipset Wedge for Car Interior Dome Dashboard Map RV License Plate Side Lights DC 12V Green

Sorted out my indicator issue (on another thread). Hazards working but no indicators. After renewing every earth back & front as a precaution attention turned to the hazard switch (apparently a known issue). Still nothing doing. Out of desperation I pulled every fuse & found the fuel gauge fuse...

This has been driving me nuts all day. I’ve replaced faulty bulb & renewed all earths associated with that light and I also noticed a side light out so renewed those earth connections as well. I now have following issue: All lights work No indicators work at all using switch on steering column &...

V8 4.4 everyday of the week. I’ve got a 2014. Completely understressed engine at motorway cruising. Put your foot down hard though & it goes like the proverbial par-boiled moggy. Returns 32-35 mpg. As others have said the V6 has an abysmal reputation.

Any ideas on this one? When I turn right dash indicator lights show up nicely. When I turn left there’s just a faint glow. When I put hazards on there’s nothing. All indicators are working normally except the right one mounted on the wing. I’m assuming that may be the problem but can’t fathom...

Definitely at the top! Guess I’ll have to the the old fashioned way. Any particular reason Lynall? I used the reverse bleeder as I’d used it for clutch on my Lightweight & worked a treat

A weird one. I’ve replaced the front brake callipers on my 92 200tdi. I clamped the front hoses off whilst changing them. I reverse bled the brakes & everything seemed ok on a short 2 mile drive. On a longer drive the next day the pedal suddenly got soft but pumping it brought it back. Next day...

Chassis was replaced a few years ago with a Richards Galv chassis whih was then treated with black Raptor paint. Its holding up well with no signs of corrosion anywhere. Bulkhead also galvanised and lower sections painted with white Raptor. All exposed bolt heads underneath the vehicle are...

I've coated the unthreaded section in copper slip and used locktite. Heads coated in thick Lanoguard grease

Nightmare job completed.I've had a couple of OEM front calipers for my 92' 110 200tdi for awhile waiting to fit them. The ones we fitted to mine a few years ago were Britpart itmes and I've had nothing but problems with the inboard pistons sticking. The Landrover has a hard life in salt water...

Reinstated the polythene water deflectors behind the door cards in a final attempt to get rid of the small lake in drivers footwell after heavy rain!

I used to have same issue when I had an L322. Turn pump nozzle upside down when filling tank helped

Mine passed with them fitted

I’ve got Accuspark fitted to my Lightweight. Easy to fit & no problems with it in last 5 years. Had luminition fitted to my 74 Lotus Elan. That’s more complicated to fit

Cheers guys. We used a lot of stainless fittings at work before I retired so still have contacts with local suppliers. They’ve supplied me with core T bolts for propshaft UJ’s when a well known parts supplier sent the wrong ones !

Yes, I was thinking of stainless.

I’m having to replace my lower steering shaft UJ,s again for 2nd time in just over a year. Replacement parts were Britpart & the UJ,s have failed already. Bought OEM ones this time that don’t come with new nuts & bolts. Can anyone help me with the size and whether or not they’re high tensile?