T piece flowed fine so thats that! Must be the actual block at fault yeaaaa! Going to look at another landy tomorrow so should be able to make a good one :o)

Hi, I'm only in Telford and interested in the Landy I have PM'd you but not sure if its gone through? If still available let me know cheers. Clive

Will check T piece tonight and report in! I've had the head off 3 times! It's baked one head and already had been skimmed to the max hence another head fitted! Fun Fun Fun! Did buy the truck cheap due to head and was supplied with bolts and gasket managed around 2000 miles before the thing...

Hi All, Before I go changing the engine here is my last ditched approach for idea's? So water system on my 300tdi pressurised. I also had white smoke issue. I'd in error left oil in a couple of bolt holes so the head had not tightened down correctly! DOH So cleaned all up dried holes out cleaned...

UPDATE! After getting the replacement head checked to ensure this was not the issue I have now got it running. Head was fine with not issues. On rebuild while head off decided to check timing belt again. Locked pump off with pin and noticed that 4 and 1 piston were around 4mm off top of bores...

When I crank the engine with front banjo bolt loose there is a spray of diesel but its not under as much pressure as id expect. Normally good injection would shoot diesel quite high this just squirts out an inch or so?

James I had the head off when set up so could see psitons 4 and 1 at top and yes crank pulley at 12oclock, Cam lined up with case mark and pump locked off. I even used white paint marks to make sure nothing moved. only movement I had was in the refit of belt when backed of the 3 pump bolts. This...

Ok read all the forums currently on 300tdi injector pump timing and head issues. I will list what has been done and tested! Engine run fine before starting just pressurised via water instantly. I have replaced head( new bolts,gasket and injector copper washers.) While doing head also decided to...