VDO or Siemens for the MAF. For the time being unplug it and see if it helps. If it does then thats the issue.

Tend to disagree with it being the SMF having had one in my Daily 110s and D2 ive never noticed any additional vibrations in over 100k of driving in 3 different cars. Non genuine mafs are worthless. Unplug it. Is it more like a kangaroo effect/feeling or is it a true misfire? If it is...

If its as dry as you say you risk friction welding the bearing to the stub. So id get a new one of those as well. If the calipers not been off in a few years get new bolts and some stripped head removers. Irwin make a great set.

Went about fixing that rear wheel bearing. Of course the caliper bolts where rusted away... Open it up to the single nut system... Go to my wheel bearing box, can I find my two nut conversion? Of course not. Of to work where they should be. Can I find them? No 😡 Luckily found one on an...

Inbetween all that been making snorkels again! 3" top entry and a 3.5" side entry for a Puma - that has been a pig!

As long as they are 8.8 can get them anywhere

M10 i believe. 12mm.short/turbo side and 35 maybe 40mm long side i think. Been a while since i had a stock turbo tho

One of Empires own 90s in the sand. Fair but more power than me, same diffs but no TC and about 1T lighter 🤣

Finally after 5 years Ive managed to take a VNT TD5 around Marquenterre and its nothing short of incredible. Near limitless power and torque on tap when i need it. No huge run ups, no flooring it and snatching 3rd. Just driving up, mostly with ease! Few of the hills I was on the limit of 2nd...

Why do you say over priced? You aware of material costs, labour these days? Even if made in china. £300 is very reasonable. Id dare you to have them designed and manufactured to same standard first time for less. They are CNCd remember not mass produced cast. I designed a set of security...

Nothing too exciting just did a big service. All oils and filters. Engine oil, black but no bits or discolouration Front diff had a little christmas tree and a bit silvery, too be expected from an ATB after 10k. TX box clean as a whistle Rear diff, tiny christmas tree but otherwise clean...

Avoid terrafirma. They are terrible. Get OME. Need extended brakes lines. Use jubilee clips to hold your springs in. Youll need new front turret rings, 9/10 yours will sheer off.

Youre basically interrupting the fuse. Its basically the same as pulling the fuse out, just instead you have a switch inline. So it just needs a 12v source from anywhere really. Could loop it back down and into the spare fuse holder.

First pic. That one. Normal fuse goes in the top slot i think, run that to the in line fuse, switch, back to live. Nope no relay needed. Had that on my old 110 for years without any issues, and on my D2 for a couple years.

Very easy. Buy a fuse piggy back + an inline fuse. Wire the piggy back into a switch with an inline fuse. Push switch it cuts off power to the fuse and TC/ABS is off. However it will turn off ABS as well so not for road use. Turn it back on and all works again, no faults to clear. Very...

Could be a hose but seeing as they are allisport i wouldnt suspect them but ill test them anyway. No warranty over 12 months old now Cheers 😁😁

So ive got a slight inkling my Darkside intercooler may have split... Bit slow to come onto boost and in low revs/boost is coal rolling levels of smokey 😳 Its over due a service so that wont be helping either, but shouldnt be this bad! Going to devise a little boost leak checker. Will cap...

Assume its a TD5, ideally you need to plug into.some diagnostics and see why the TC fault is active. Could be many things

No difference on a 300. It will on a heavily tuned Td5 though

Wrangler. Mates got one and its brilliant. Lockers and ARB disconnects as standard on a switch. Fit 35s from stock Comfy, quiet, even has a 230v inverter built in. But 45k.... Then again how much have I spent on Land Rovers 😂😂