Hope you get it sorted, for the future I can wholly recommend Winchester Gears in Rotherham, I am not sure if they do series, although they might if asked. Just got a stage 1 R380 and stage 2 LT230 from them, top guys, willing to spend some time and lend advice. Quality of the build is spot on.

Bump. open to offers on stuff if it helps shift it.

Full set of D2 brake discs and pads Britpart Discs, EBC pads. Brand new in box £90 Also have a D2 driver side front mud shield. Brand new, £20 Set of 5 insa turbo ranger tyres, brand new 255/55/18 - £430 warrior workshop hoist - 1000kg model - £180 Located in Rotherham.

Hi all, might be a daft question, but I am wiring a bank of Carlin switches, for various bits. is there a level where a relay should be used to activate from the switch vs when not to use a relay? second question, is it ok to feed the switches used to activate the relays using a single cable...

They also do decent axle stands too. To be fair, i have a lot of their kit and its all solidly built and its not super expensive either.

I have one of these: https://www.sgs-engineering.com/tj3x-3-ton-trolley-jack Very happy with it, and its solid.

Yeah, it’s fine, I just swapped for one with a CDL. No clunks or anything.

Full set of 5 insa Turbo Ranger tyres - brand new, never fitted. 255/55 18’s £450

Thanks, but I’ll pass. Will weld it up and MOT it.

Hi all, also selling my Defender 110. Currently has no MOT. Failed MOT a couple of years ago on Chassis mainly, needs some welding but I just don’t have the time or inclination to fix at the moment. it’s done 300k, but has had a new replacement disco engine at some point. It’s a CSW but...

I have the following for sale: DISCOVERY TD5 HEAVY DUTY SUSPENSION KIT DISCOVERY TD5 LIFT KIT PLUS 2" TF230 - £350 - brand new in box - normally £390 Adrenaline 4x4 heavy duty turret towers - brand new £80 D2 Terrafirma steering damper, brand new, but no box £30 300tdi discovery engine - had...

Hi All, My D2 TD5 Landmark is for sale. It needs quite a bit of work including Rear Chassis, needs a quarter chassis ideally Front crossmember needs some welding, and I suspect the arches do to. Auto box has a leak from the pump, probably needs a new box. Needs rear brakes and ball joints, and...

Hi all, In preparation for my rebuild, I acquired a set of axles off a newer 110 that had abs. Now I know for the rears, I can just build it the same and blank of the sensor, however for the front, the swivel housings are different - my 300tdi has FTC3308 / 09 but the swivel housings on my...

Looking for 250 or make me an offer for the lot, the downside is that it is attached to the remainder of the car. Some good bits still left on, tubular bumper, decent springs, axles etc. All runs fine. I have the body panels and rear door etc, but it’s pretty stripped out. Will chuck everything...

Video of the problem

ECU was fine, wasn’t even damp. To be fair, the water was probably well below the wading depth. Dry as a bone. Yep, completely dry.

Hi all, I have a TD5 auto discovery 2 and had a weird issue today, I waded through a bit of flood water, probably no more than a couple of feet deep, but even with my foot mashed into the carpet the engine wouldn’t rev, and then for half a mile after it felt like the power was clipping, then...

Not stuck, Just wondering if anyone near Rotherham, Sheffield etc has a nanocom or similar for a disco 2? Got three amigos on and not sure why. @Don1 looks closest on the map but wondering if anyone else has one nearer, or can recommend a good garage nearby Thanks in advance. Joel

Just a further update, I've made some progress, but it still doesn't seem right. Pedal seems to be really low, and requires more force that i would expect, and there doesn't appear to be any gradual application of brakes, they appear to either be on or off. Although there is vacuum in the pipes...

Ordered another master cylinder - i marked the reservoir and left the brake pedal wedged down for a week, checked today and the level had dropped, but once I unwedged and pumped the pedal a couple of times - the fluid level returned to normal. So i can only assume that the seals on the master...