my landy has high lift blue springs does anyone have any standard height harder springs to swop

nice one johnlad but im after standerd height as im in and out the back all the time the height is a pain thanks any way

hi there guys happy new year i have a defender 110 2.5td g reg it came with 2 inch lift blue springs not happy with them as it is my work vehicle i dont need the lift im looking for standerd height springs but harder as i carry a lot of weight does anybody have any and do they wont to do a swop

cleaned it numarus times i did find on the other one that was leaking that if i left out the metal collapsable washer at the bottom they sealed allso replasedthe leak off washers allso took out the same waser on no4 but still leaking even after hanging on the nuts

forgot to mention i have just done a cylinder head overhaul all the inlet ports was full with gunk the valves had oil burnt onto them that allmost blocked the ports but the valve stem oil seals was in place but all the exhaust seals was at the top of the valve with no burnt all any way laped...

hi i have a defender 2.5td number 4 injector is ****ing out where it sits in the head allready replaced the copper washer that sits in the hole half way down this is a 19j engine

cheers lads, the 635 is looking more and more promising, i will post some pics tomorrow, thanks for your help

i have taken the pump into many parts places at first the they gave me a fwp1847 it fit the block perfact piped up ok but when i went to put the 4 bolt pully on my bolt holes are further apart but without the pully on there is a thread on the end of the shaft for my viscus to fasten straight on

right just looked at both of those parts, 637 is a no no and the 635 looks close but there were no thread on the end for the viscous fan, the flange on mine is for the fan belt pulley to bolt onto not to drive the fan, supposedly its a petrol 2.5 pump is that possible??

alright redhand,the part no is hrc 1278, but!!!!! there is no cross reference for this part??? does it ring any bells to you??

hi i'm brand fresh new on here, ive got a 110 defender which needs a replacement water pump. anyone know if i can get it reconditioned as i have tried everywhere for a water pump each one supplied fits the engine block the holes on the pulley are to close together (pcd too small) i am based in...