Thanks one and all.

Removing the front bumper, where do I access the 10mm bolt/nut for the wing to chassis.

Hi, Since fitting the EGR bypass I also get MIL fault Indication 0404. I have the Temp sensor in the air inlet hose. Has anyone a solution to fix and prevent the Mil lamp showing.

I have a very worn thread on the bolt Part No ANR5333 presumably the captive nut also. I can't get underneath to look until later this week, so I can order new bolts I need some help. It appears a longer bolt can be located, does anyone know if an additional nut can be located on the upper part...

Hi All, A bit of help needed.Jjust swapping my very tired IRD but need to swap the coolers as the pipes are damaged on the replacement, before I damage it can any one advise how to remove and re-fit the cooler. Thanks

Thanks for the comments, having now seen the manufactured front bar I’m sure I can knock one up and with a removable hitch. It’s not that it can't be reversed, that easy enough. The drive is only two feet wider than the boat and with the vehicle still in the drive between the house...

Hi All, I have a Freelander TD4 which I use to tow a boat. I need to be able to push it to make parking up my drive easier. Are there any ready made fitting to fit a front tow ball or have you any advice. Thanks:cool: