Thanks Gents, Bled as per manual, I'll get the codes read this weekend I hope. It just puzzles me as to why the traction fault shows but no abs fault until the car is moving above 5 miles an hour. Thanks again Drew

Even folks, Its been a while, thing have been going well till now. I popped a rear brake line a few weeks back. Managed to get them all changed and fully bled! Unfortunately a new problem has reared it head. The abs and tc lights came on during the pipe failure. Replaced pipes and...

I've got 20's on mine, I'm sure they are 275/40/20s and she tramlines occasionally so I wouldn't go for anything bigger personally. They are the genuine RR ones and they look the business though. Hope this helps.

Oh dear, ECU arrived and the problem was still there!! New sensor ordered now!!! mmmmmmmmmm!! Drew

Thanks Datatek, Thanks for the speedy reply, I suspected as much. Oh well off to try and find the part number and an OEM replacement it is then. Thanks again, Drew

Morning all, Hope your all enjoying the fine weekend weather. I have been having issues with my late 99 4.6hse(Bosch) abs and tc lights. They are now on permanently. So yesterday I took it to get the fault codes read. It says there are various issues with the front left sensor. This...

Hi Folks, I've been having the odd ABS fault come up every now and again on my '99 4.6hse. I replaced the accumulator as the pump seemed to be running overly long during start up, I though this might have cured it. Nope! I bled the brakes using the procedure in rave and it seemed to go...

Hi Folks, Does anyone know of a place that can read the fault codes on my '99 P38 in the Elgin area(except main stealers?) I've got an annoying TC fault that keeps coming up and would like to pin point the exact location of the the fault. Thanks if advance. Drew

Thanks J, I can't think why this would have been disconnected. Thanks though I will reconnect it tomorrow. ATB Drew

Evening folks, Well I managed to get the blend motor changed today. It was a lot easier a job then i had originally thought. I kinda wish had had just bought the harness with all three and done them all in a oner. Hoo Hum. I have disconnected the blue wire to the rf receiver to try...

Evening folks, Well today i finally managed to get the dash off to look at the Blend motors. Seems the passanger side is not responding, flap moves okay so thats a relief as i ordered one from Island on Wednesday. A quick question regarding the stereo wiring. I have a 99 P38 which has...

Evening folks, hope everyone is okay, bloody cold now here in the North East of Scotland! I have managed to remove one of the screws holding on the passenger side bend motor. I have moved it off the cog and have tried moving it by hand. Nothing is happening. Should I be able to move...

Thanks for that Malcolm, I have got as far as finding out that this is the motor, I'm just looking for some pointers on how to dismantle the glovebox from the car. I can't find instructions anywhere? is there a quick and easy way? or is it a long drawn out process? Cheers Drew

Evening folks, It looks like my left hand blend motor is funked. I think i am being a complete divie but does anyone have the instructions for removing the actual glovebox?? I can see the motor itself but am having problems getting to it. Is there a quick and easy way to get the glove...

:5bhurray::5bhurray::5bhurray::5bhurray:

Thanks for that. Is there only one sensor that goes into each wheel? I take it the abs uses the same sensors? Is there there an easy way to do a system check or does it need the fault codes checking? Thanks again Drew

Hello Folks, Driving round town tonight my TC light came on and when you shut down or start up now it has the TC failure. Coming out of a car park I clipped a curb with the rear passenger wheel could it be as simple as the sensor has dislodged. Is there anyway way I can find out where the...

On another note, When stripping the panel off under the steering wheel, I found the speaker under the wheel disconnected. It is an ordinary 3.5mm stereo plug to a rectangular speaker, any help idea what this speaker is for?? Thanks Drew

Woo Hoo. I stripped the dash down today to have a go at the blender motor. turns out it was just a bit stiff. As I turned the ignition on and off I noticed it move a small amount. I gently applied a little pressure with a screw driver and it moved a whole lot more. I then functioned it through...

Hi folks, Hope your all fine this cold May morning. I joined the Range Rover fraternity on Sunday so have been reading these forums like mad an thought i had best introduce myself. I bought a '99 4.6 HSE to see if the wife could live with it before dropping a few more of our £s on a...