Thank you, i have DL the software, should be able to make up a cable easy enough. I was wondering if it might take a bit of time for the system to work out if something was wrong, I shall take it for a run later and see. Is the compressor piston pump an easy job, are parts readily available...

Hi all, It would appear that my EAS is not behaving. I noticed that in my short 1.5 mile journey to work that the level selector/indicator did not stop flashing. On the return journey it did, but as i parked i noticed that that drivers side was lower than the passenger side and that when i...

just pop the clips and push the cowling over the fan to get the rad out, but if your going to get the water pump off then you will need to get the fan off anyway. I bought the tool, there is a pattern available for about £30, well worth the money. you could try using a viscous fan tool from...

Thanks Vouge, what about the BECM? will that need replacing or updating if that is at all possible?

Can anyone speak from experience? I have heard that replacing an earlier Gems engine with a later Thor unit is not a direct replacement, that the mounts are different? Thanks

If you are going to get a P38 then make sure its post 1997, they have much more reliable electrics. The 4.6 has a nasty habit of going porous and overheating. If you have a little more then its well worth getting a 2000 model. Watch out for oil in the water and let it run for 20 Min's on idle to...

Thanks for all the responses, yeah I see what you are all saying! I used to have an Audi A6 which was pretty much on the nose with the cruise control but was a lot lighter I guess and didn't have the aero dynamics of a brick! Was concerned that the vroom vroom nature of the cruise action may...

I have recently become the proud owner of a 99 Autobiography 4.6 with a sequential LPG conversion The cruise seems to work ok generally, but it only seems to keep the vehicle within 2-3 mph either side of the speed i set. This causes the vehicle to gently accelerate and decelerate constantly...