I'm after a set of spot for the front of my TD5 facelift Disco.. I'll be mounting them directly to the bumper, so they need to be fairly slim.. I was thinking around 8", maybe Wipac 4x4 spots? I'm happy sorting the wiring, but does anyone have any advice regarding which lights will...

Hi folks, I'm after a bit of advice regarding the above vehicle, which has just turned 95K. We've had the car for 5 or 6yrs now, and all has been well. I have always serviced the car myself and so know what state the underside is in. The bottom of the engine has always been oily, but...

Hi Folks.. I'm after an EGR by-pass for our `54 TD4.. I've just had a quick look on eBay, can someone confirm whether this is the best part to get or if I should be looking elsewhere ? I don't really want to be messing around blocking pipes off. I just want a tried and tested kit that is...

Have a slight oil leak around the oil filter cap / oil filter housing. I'm gonna swap the O ring when I get a replacement, but if that fails, I'm guessing that it is either a cracked cap or the gasket between the housing and block. Is this a known fault ? Any other suggestions as to what...

Hi Folks, I purged the tank using the ECU 5x throttle presses on Igg II about 8-10 times and the filter finally stopped glugging and swirling. The car then started fine and after a good leg stretch feels fine !! Think I must have had alot of air trapped in the system. I'll pre-fill the...

btw.. I had tripped the inertia switch, but I already found that !!

Thanks mate, you have put my mind at rest.. How do I know when its up to the required pressure ? Should it start straight away ? I hope my accumate can charge the battery overnight !!

does it take that long to get the pressure back up ?? first time I have serviced it.. I know they run at a very high pressure compared to other engines, but it seems to be a real pain to get it up to pressure ? Is that normal..

Hi all, I have a TD5 MY03 Disco. I serviced the car today which was very straight forward until I came to the fuel filter. The water sensor on the bottom of the filter broke the top 2 threads when tightening, and although it was still tight, I went to LR and purchased a replacement. The...

My Kenwood did the same.. the wires were broke on the radio interface in the dash, behind the radio.. Hope that helps..