Ok, so I eventually figured it out... for anyone else who has the same issue, this is what you need to do! 1. Unscrew the four screws holding the cover plate and remove the plate. 2. Remove the circlip and any washers holding the link arm onto the cam wheel. 3. Remove the link arm. 4. On the...

Ok, so I think I followed the instructions from @miktdish @tottot . I took the back off the assembly. popped the eclip off the spigot connecting the arm to the cam wheel and the eclip from the axle of the cam wheel, pushed the cam wheel out, rotated it 90 degrees. Pushed the cam wheel back in...

Sorry, I'm probably being dense, but I don't understand how that will help me. I think you're saying that my motor, which currently parks in the position of the assembly on the left of the two pictured should park like the one on the right. I understand that the park position is controlled by...

I thought about that, but if I position them at the bottom of the screen when in the parked position, they'll head downwards through the bulkhead when switched on! I've ended up with three wipers to clear the screen, which isn't really that relevant, but the attached pic shows the wiper sweeps.

Hi All, This forum has been great for helping me out with little problems I've come across with a custom truck I've been building, I've found some great help, especially with electrics where people have previously posted answers to the same issues I've been having, but this time I thought I'd...