Sorry. My bad 😔😔

Got the window to wind up by removing the casing on the motor and exposing the windings. Put a cordless drill on the centre shaft and having worked out which way to wind it I used the drill to spin the shaft and up went the window. 👍🏻👍

All sorted. No idea what the problem is/was but having spent nearly all day dismantling,testing ,thread reading etc I decided just to put it all back together. Everything now works. It’s some kind of Freelander witchcraft 😂😂

All done. Don’t know what the issue was but put everything back together having spent hours dismantling everything and hey presto everything works as it should. Must be some kind of witchcraft😂😂

I have already managed to get the door card off.The proclem is that the window has powered into the open position and i cant get it to go up.Is there a way of powering up the window mechanism using a seperate battery onto the rear of the motor.If so what terminals do I need to feed.

Following on from my previous post I have now managed to get the tailgate window down but have trapped wires underneath the window.Does anyone know how to power up the window motor to get it to raise.Only need it to go couple of inches.Found a pair of relays in the rear booth area (brown in...

Ok thanks for the info. Didn’t think about window and door connection. Will get window issue sorted first and see where that takes me. Thanks again

Hi all.I have a 98 FL1 and she has decided to stop sending powerr to the rear tailgate actuator as well as continuously blowing the fuse to the tailgate window(i can live without that working).I have managed to open the tailgate by supplying the actuator with a seperate power source directly...

I had the same issue.If you get in the boot and use a tool to lift the corner of the door card clear of the lip you can remove the whole thing by sliding your finger under the top of the card.To open the door i used another battery and used it to feed power to the actuator terminals (purple and...

Hope this helps

Can take photo if that helps

2lt diesel

Hi all. Not sure if I am posting in right place having joined an earlier discussion from a 2020 posting. My 1998 FL 1 has a major water leak which I believe,having read a few postings,is coming from the core plug on the right hand end of the engine where there is a black plastic cover. Could...

Sorry to hijack this posting but I have the same problem on my 1998 FL1.Are the details the same for my vehicle. Meant to be going to Wales in the Xmas period but looks like that could be a non starter. If you could confirm the details that would be amazing. Thanks