Car fixed... by god probably... So I cut the white wire pin 9 c120 from becm, no ignition 12v, ignition position1 12 v, ignition position2 12 v. I fed the rest of the wire that goes to the fusebox wit ground and started her up. Runs like a charm, and I say that because engine is new, 1600km, :D...

Grrrrrr, thanks for the reply. Found some information on some other related forum that pin 9 from c120 white wire from becm should supply pin 8 from C173 purple connector under fuse box. I think this should power my relays. the wire has almost 12 v probably from the relay coil in the fusebox...

So, I mounted the fuse box, and I am in the same situation. Decapsulated relay for main engine Rl19 and relay for ignition coils/maf/etc RL15 and manually activated them and I can hear the ABS pump, plugs relay and injection cutoff valve working. So conclusion is that I have no comand to these...

Yes, after I posted I also disassembled the fuel cutoff switch and put it back together. So no feed to the fuel lift pump, no feed to the plugs relay and no feed to the pump shut off valve. Gave 12v to the shutoff valve and started the engine on first crank but wierd that it got on 5000rpm an...

Hi, reviving this post as I have the same initial problem, leaved the car overnight, in the morning no lighst in the dash regarding glow plogs, nu feed on the glow plugs relay, no feed on the injection pump cutoff. All the above are working but not getting feed. P38_ OTMS user said " Update...