Hi again Nodge - i really need your help again on my Facelift 2005 1.8l magnetic abs bearing issue - if you can please help . Yours faithfully, arnodafe72

Checked rhe plug - sprayed with electrical cleaner spray - non change !

Gonna check it now, but i doubt it, as the old sensor had the same code without me ever being in that part.... I feel like i damaged whatever it is supposed to read ....Stumped.

@Nodge68

The part i put in was VKJA 5508 The old sensor attachment bolt was seized so u was given a device where i bored a hole centered then tapped in a high steel shaft which then would have a 6 sided 'nut' slid over to better turn with a spanner - it broke off leaving the strengthened steel rod left...

Hi again Andy ! Yeah, i put back my old CV joint which was on when everything was working fine and replaced the ABS sensor with a new one, as the new CV joint which was slightly different, i had put on had bent and possibly 'damaged' the old sensor giving me the C1034 code. With the old CV joint...

Do you have a Facelift Freelander? What year is your car ?

The one with no ring is a little shorter ....15mm . Could be the solution. I still have the old one - when i get time i'll check it. Its just so odd there's no immediate part for it - marked for my car. All the CV joints fit even for my VIN number, but only 1 is correct.....

Yeah, but still stuck on solution. I noticed that there are two different CV joints for the Freelander 1 - one is 144.5mm and the other 146mm long which has the outer abs ring - should i have the longer one ? Both have same number of splines etc. See pics

Yeah, i tapped mine off aswell t o get it to fit, but it seems to go in too far and bends the abs, then the new abs won't go fully down either in order to work....you didn't have that problem ? Was your reluctor ring on the outside flush to the rubber boot ?

Hi guys ! Thanks for all the help so far over the past couple of years! Quick question - just like the fuel pump fuel meter in the 2005 Facelift Freelander 1 1.8l petrol K-series 18K4F engine 86kw 117hp has a specialized circuit board that is 'reversed' in resistance, meaning that if you put a...

Hi again man ! Yeah, hd to drill out the abs bolt but couldn't get the whole thing out s i had tried drilling a smaller hole then using a hardened steel extractment tool se which actually broke off in the bolt making it too hard to drill out later. I place removed the old sensor anyway and set...

Sensor bolt is rusted to hell - probably gonna be the hardest part of the swap out - part ordered today and changed my steering tie rod end that was loose - we'll see - hopefully i don't have to change the bearing - ha ! I told rhe other guys where i live about it 'cause even as farners, they've...

Cool ! Just a side note - is it possible on cleaning out the inside of the wheel hub that the magnetic lines on the abs side of the bearing have been damaged or partially removed ? Took out flakes with a flathead screwdriver and sprayed with brake cleaner. ( I don't think so but it is good to ask).😏

Yeah, this part looks the same - same as i thought. So many others that say they fit that don't have the same sensor shape and attachment screw/ring. 🍷😏

My Freelander Facelift Freelander 1 1.8L petrol 2005 SUV 4WD 1795cc 86kw 117hp engine: 18K4F Vin number: 2005-04 SALLNABA85A488046

So there's actually nothing on the cv axel that its reading at all - just the wheel bearing - that's crazy - i haven't found anything about that anywhere ....thankyou so much man - i was just about to attempt to put the ring on or put the old cv axel back on to see if the problem went away, even...

Is that a change in the Landrover Freelander 1 Facelift model or ?

Hi guys - if you can help - heard clicking when i turn under load and decided to change the right outer drive axel. The new part i got for my Freelander 1.8L petrol 4WD K-series 18K4F engine 86kw 117 hp is confirmed as a fit ! However on changing, i couldn't get the drive axel back into the hub...

Hi Andy ! Have no parking lights front & back, and no rear registration plate lights working. All fuses are good and the bulbs are good .....any ideas ? No power getting to them..... Freelander 1 petrol. regards Arnodafe72