Sorry, sold the RR long ago. No cables left.

If your pump is running continuously you may have a problem with the pressure switch. The pressure switch sends a signal to the EAS ECU when the correct pressure is reached, the ECU then shuts down the compressor. I beleive that there is a test procedure in the RAVE electrical manuals.

Hi Neil Sorry for the delay in getting back to you. If you hear the relay clicking when you hit Initialise you have got that part (the transistor/resistor) of the cable correct. Since there is nothing recieved it looks like you have simply swapped the TX and RX wire arround. Try switching...

Hi I have just taken a look in the doc. I can see the confussion. C 875 is a type number of the generic plug. It is unfortunate that it looks like a Range Rover plug number as used in Rave. Regards Rishi

NKG: I can't find any reference to C875. The Classic diagnostics connector is C365. If you search in the Rave Electrical Manual for C365 you will find the pinout. You are correct about the loopback cable. When you join the 2 together for normal operation the earth circuit for the ECU is...

The sub in the Classic is a bit strange as it expects to have a speaker strength signal and then this signal is amplified again by the amp attached to the the top of the sub. A line signal is not strong enough to drive the sub, it needs more. I am also trying to work out the best way to wire it...

You can only buy the cable from the states, it is specific to these applications. I know the guy has them already made up and will send them out immediately. However it should be easy to get hold of the ODBII plug. It is fairly standard and not a RR specific thing. Regards Rishi

Hi Vixxy Sorry about your "stealer" problems. If you download the program from sourceforge.net/projects/easunlock it contains a readme with full instructions about how to make/purchase the cable. Regards Rishi

Hi Neil Yes all the software will work on any Classic model with EAS and all P38a's. The only difference is the cable required. If you download the EASDiag package from sourceforge you will find a readme which explains how to make the cable for the Classic. For people who can't manage it I...

Hi All This is my first posting here. I have owned a '94 LSE "Softdash" for the past 4 years. As an English ex-pat living in the Netherlands I guessed I should also be on a European forum as I have been mainly residing on the rr.net forum. At the end of last year I started getting problems...