It's the old type with one shoe at the top and one at the bottom. One of the small rollers was missing and as the components were quite worn I purchased a new expander unit for £42 (Part number AEU2734 if anyone else needs to know from this post)

Thanks for the link - I can only see reference to drums connected to the wheels but my drum is a single one connected to the propshaft

I may have celebrated too early - with all the adjustments set correctly - the vehicle still rolls forward on a steep hill! Handbrake is on max on 3 clicks - wondering if there is a roller that has dropped out? Does anyone have a picture of this part? Can it be ordered separately

That was the problem in the end - I had put the lower one, the wrong way around!

Thanks for this - Trying to visualise what you mean. is that the two wedge shape bits? The longer bit of the wedge is currently facing the rear of the vehicle

Hi all - hoping that someone can help me with a diagram of the components in the parking brake drum connected to the rear propshaft. I made the mistake of not taking a photo before taking it apart to replace the shoes and the shoe holders dropped out on both sides. I think I must have put it...

Thanks - it is the 3 litre

Does anyone have a link to any video showing how to change the fuel filter (diesel) on a Range Rover Sport please? (L494 - 2014)

All sorted - thanks everyone for the advice. As suggested, it was the fuel pump solenoid that needed replacing. The video from Mike at Britannica was really helpful as it is really difficult to get to. I made the suggested spanner with the help of a grinder and a blowtorch to bend it a bit...

Hi all, hoping someone can point me in the right direction with this. My 90 (Disco 200TDI - if that has any bearing on the fault) starts and runs fine. Problem is when I come to stop and turn/remove the ignition key, the engine continues to run. I can only stop it but stalling it in a high gear...

Thanks all - will have another go at it tomorrow - so much different to the house electrics that I'm qualified to work on!!

Hi Lynall thanks for response I will check the relays to see if they are feeding anything back into the system but as far as I can see from the wiring diagram, it is only the front wipers and the reverse light on that fuse. (Although it is weird that with the ignition on, I can turn the heated...

Please can anyone help with this strange fault. Fuse 9 on my LR90 feeds the front wipers and reverse light. However with with fuse 9 removed there is still 12v on the circuit and the wipers and reverse light work with the ignition off! If I put a new 15A fuse in the wipers and reverse light work...