1. C

    2.5l petrol 90

    Thank you, really appreciate your input. I'm new owner so finding my way.
  2. C

    2.5l petrol 90

    Looking around there are very few petrol models. I plan to spend more time and money on it but want to ensure I'm not throwing good money after bad so to speak.
  3. C

    2.5l petrol 90

    Thanks for response. What swung it for me was new reconditioned engine fitted 3000 miles back. Previous owner spent £5k on this with new carb, starter, alternator, etc.etc
  4. C

    2.5l petrol 90

    I bought a 1987 2.5 litre petrol 90 last year but beginning to think its a 'non preferred' model. My logic was that it's better than a dirty old diesel model. Any thoughts?
  5. C

    Defender 90 Wanted early Petrol Defender

    I have a 1987 D reg 90 2.5 litre petrol. Stratos blue with white top. its a van type body. 189,000 miles but had new reconditioned engine 3000 miles ago along with new clutch etc. new carb, new alternator and starter motor. Many thousands spent over last 3 years. Boost alloys, loads of new...
  6. C

    Spray cans

    Just trying to find supplier of Landrover stratos blue spray cans. Had some from Rimmer bros. But I need larger can than 150ml.
  7. C

    Defender 90 drive shafts

    Thanks for input everyone. I managed to remove shafts and they don't look too bad although they are very slightly twisted at the diff end. Spline profiles look good but with very slight burring on splines where the twist is. I am just trying to eliminate the clunk that I get when dropping the...
  8. C

    Defender 90 drive shafts

    OK tried levering the drive flange with crowbar but it still won't come out more than 5 or 6mm. Didn't want to force it in case I damage something. Could there be a shoulder on the shaft getting stuck behind oil seal?
  9. C

    Defender 90 drive shafts

    OK thanks but I tried prising the flange away from the assembly with the circlip in place but no luck.
  10. C

    Defender 90 drive shafts

    My first defender. Trying to remove rear drive shafts on my 1987 defender 90 so that I can assess rear diff etc. Removed drive flange and circlip but shafts only move by about 5mm. Do I have to remove whole brake drum and backplate assembly first?