Ha! could be a contender...! Spline looks like its worn completely smooth...

Best of luck, hope it is just the slave...

So, may have it sorted...(touchwood!!) Replaced the flexible hose and bled the system, problem was still there, re-tightened all the joints on the hydraulic system bled it again and everything seems ok. Woo hoo! Looking back at the whole thing I think there were several problems. The slave...

It's looked better that's for sure!

It's odd, because there is no obvious fluid loss, no drips, and the reservoir appears full, so my thinking is with vibration and are use these cracks open up just enough for the system to suck in air

I have ordered another flexible hose, so will fit that tomorrow night and hopefully that will be an end to it, although knowing my luck so far probably not…!

Don't know how well you can see those small cracks… So, bled the system again this morning, and there was indeed air in it. Everything was fine for about an hour then the problem came back, checked the flexible hose it wasn't ballooning but on closer inspection the rubber has gone quite soft and...

We checked the condition of the arm and release bearing when we had the engine and gearbox apart, all seem fine…

Many thanks for the ideas guys, I have a friend coming over tomorrow and we'll get into it then, so hopefully I'll have news after that,a with a bit of luck a working land rover!!

I'll give it another go tomorrow just to be sure.. Thanks for the advice I'll let you know how I get on.

That's exactly what happens,e running nothing. engine off all gears no problem. I have replaced both slave and master cylinder and bled the system so I'm guessing it must be the clutch then...?

Cheers!

When I put in the new master cylinder I made sure the adjustment was exactly the same as the old one. when that didn't work I adjusted it almost to the end of the thread for a bit more leverage and it didn't seem to make any difference...

Just googled it. I think that was replaced along with everything else about 10000 miles ago could I really have one through a clutch in 10000 miles? I do do a reasonable amount of towing but surely that seems excessive...?

Wow thanks for the quick response! The pedal feels perhaps a touch light, difficult to say. Forgive my ignorance the cover plate is the metal plate which sits over the friction plate?

Hi all, wonder if anybody could help me with this as it's driving me mad!! I recently developed a problem with my my 300tdi defender 90,(205k) I couldn't select any gears at all, then the problem mysteriously went away, and then came back and the only way I could get it into gear was to put the...

Hi all, wonder if anybody could help me with this as it's driving me mad!! I recently developed a problem with my my 300tdi defender 90,(205k) I couldn't select any gears at all, then the problem mysteriously went away, and then came back and the only way I could get it into gear was to put the...