Well, I have all the relevant parts(I think) all going together nicely. Another question, do you need 2 stop bolts? I only had to remove 1 but there is defo room for another on the other side of the swivel housing. Such a noobie tbh but all the advice is getting me there. Have a good weekend all.

Yeah I'm thinking a new set of rods etc. Probably just get the full kit, just bought some clamps so they can be spares I suppose. Defender 90 300TDi 1994 Hardtop

Thanks again for the useful advice. I have tackled the front left hub first once the swivel housing refurb kit arrived. It has took a lot of penetrant and heat to get all the bolts out of the pin housing, pretty much everything was badly corroded. A lot of wire brushing with the grinder and it...

Hi all thanks for all the suggestions. There is no squeaking from anywhere so I am sure all the parts are working that I have changed (Lynall I have changed all parts). I also forgot to mention I have also renewed the steering shaft UJ's. I now have it back up on the the jacks and you can...

Sorry should have said, Defender 300TDi 1994 Hardtop

Hi all after months of not being able to find time to get on with repairs to my power steering which literally had no power. I have renewed the belt, box, hoses and pump. Filled up the fluid which pulled through fine and remains at a constant level. Done the old turn the wheels left to right to...

Hicap phill, I will give that a go at the weekend, cheers. Gmacz, I doused them in WD40 first then applied some grease for good measure. Like you say it sounds like it could be the UJ's so that could be another task for the weekend. At least they aren't a fortune if needing replaced. Flossie...

Hi all, apologies if this is a repeat of other threads. My power steering was playing up on my 90 300 TDi , to the point where you just could not move the steering wheel. Ended up fitting a new pump and low pressure hose from pump to reservoir. Started up the engine and fluid spewed out of the...

Hi everyone. Just joined today and looking forward to tips and advice from some of the more seasoned owners. I myself have owned a 94 300 TDi Hardtop 90 for almost 5 years, done various jobs on it in that time and had a lot of fun.