Thanks for the file - I assume receiver is a typo for reservoir? Yes as I said above the reservoir appears to be new 2019 and in reasonable nick, the hose to it has no obvious leak with soapy water.

Whats the receiver please?

Thanks I'll try some contact cleaner on the offending plugs. Could a bad pump actually be the issue? The pump appears to operate aside from noise, switching off when gallery pressure gets to ~255psi. The gallery pressure then drops to around 40psi and slowly reduces, presumably a leak...

Thanks for that - With the testing i have done then, it appears the only cause could be a occasionally malfunctioning exhaust valve/coil to it? Can't be muffler, can't be things installed incorrectly as it works some of the time, can't be blocked gallery as it works until the fault flag...

I have the above issue coming up - had a new compressor around a year ago (when it was my dads car) and it has been noisy since. In the last few thousand miles its been throwing up a 'suspension fault' message either at start up or during the journey. It will say stay below 30 if i drop below...

Thanks for the suggestions - i think i've just cracked it. The plug connector behind the rocker covers wasn't clipped together fully - i'd found it looking tired last week so contact cleaned and pushed it back together with a cable tie for good measure (obviously just enough for one day). What...

£60 at my well regarded local indy specialist for a code read and not until march 2nd! They're doing ok. Does anyone know if the nanocom evolution can be used on as many vehicles as you like? I have 2 p38, one GEMS v8 and one late 2.5 DSE. I'd also like to know if could use it on a later v8 if...

Yep checked from cold! I actually think it had a bit much in, maybe 250ml which i have removed today. The transfer box was apparently changed recentlyish, which connection is that? The big black plug on the back? I have disconnected and reconnected all of them so *think* they're all good. I...

That was the next plan - just hoped i had missed something obvious. Do the ecu's forget or get blown somehow? I'm just curious of why the ECU change let it work for a day before showing up the fault again.

Engine running, in neutral, it shows in between the lines on the dipstick. I topped it to this level so it was a touch low before. Its red, not burnt!

I bought a P38 4.6 GEMS which has gearbox fault showing. I have done reading on it but can't quite work mine out - hopefully someone will be able to suggest something else i can try to fix it for good. Symptoms : After starting the engine the gearbox fault flashes up after around 5 seconds. It...