1. I

    Dhse Gearbox Settings

    Don't know if it's any help..... My 2.5 dse (1996) has a dip stick - ha ha. Behind the engine oil dip stick (level is fine). I have a bit of a problem when booting it, it can't decide wether to stay in 3rd or drop into 4th. could be the 'box is ready for a change or maybe just needs the...
  2. I

    Major Thinking Of.....

    Hi Fellah, went down the same road last year, bought a 2.5 DSE when the divorce came through (yippee). Just a couple of pointers - Check for damp carpets under the plastic plates just inside the front doors, mine went t*ts up as the water had leaked in through the cabin air intakes (pollen...
  3. I

    re program key fob

    For what is't worth, been down the same road. Bought second hand remote and from e-bay, phoned the dealer the remotes are supplied blank from the factory and are coded to the car, once done it cannot be changed (locked in), do not buy a second hand remote. Hope it saves you some money...
  4. I

    P38 not starting

    Hi, had the same problem with my diesel version. it turned out to be the wiring loom connectors in BOTH the drivers and passangers kickwells, check for green and furry connectors. I have removed both connectors and soldered the connections together (due to water ingress). It seems these cars...
  5. I

    p38 diesel auto hot start fix

    Hi guys, don't want to get in the midddle of a good relationship! What the F**k cures the problem, as my P28 2.5 DSE is recording 20mpg with the timed relay set up, although it goes like stink - well for a P38 2.5D anyway. Can only dream of that sort of mpg. Cheers, Ian.
  6. I

    The slowest P38A DSE in the world?

    Just a thought, unscrew the feed pipe to the fuel pump - turn on the ignition and the fuel should pour out. proves the tank pump is working.
  7. I

    charging voltage!

    Hi there, been racking the grey stuff on this one - trained as an autoelectrician 20 odd years ago. Lucas alternators should be charging anywhere from 13.6 to 14.2 volts. Hope this helps. Cheers, Ian.
  8. I

    P38 Turning over but not starting (help!)

    Hi All, just a quick note to say thanks for all the help and advice. I have just collected Rangie from the 'Indies' who have re-synchronised the BeCM to the engine ECU. To reset the system and bleed the diesel system only cost £137.00 inc VAT. Merry Christmas to all!
  9. I

    Engine ecu

    Hi Stepen, just to let you know I have just picked up my RR from the 'indies'. They have re-synchronised the engine ecu to the BeCM and she is running fine. Cost me £137.00 including bleeding the system, antifreeze and VAT. Don't lose hope, help is out there - it's just a case of 'tripping over...
  10. I

    Engine ecu

    Hi guys, seem there is a lack of testbooks out there. I smell a franchise opportunity. In the meantime, check out the local auto electricial companies in your phone book, and if that fails, check out the local garages. Someone will know someone who has one. I literally tripped over my local...
  11. I

    Engine ecu

    Hi Guys, very interesting, mine (same model) has the same fault, turns over fine but high pressure pump won't push any any fuel out (see my thread). I have had test book in the car today and it seems the immobiliser part of the engine ecu is locked down. The car is booked into an 'indie' on...
  12. I

    ATF coming out of breather and dipstick?

    Well... Erm... I've had the snip but never had a problem getting the fluid of of my dipstick, blocked filter or not! (draw your own conclusions!!).
  13. I

    ATF coming out of breather and dipstick?

    Hi There, Just a suggestion, but I think the last post was daft. I would suggest draining the ATF fluid from the 'BOX' and removing the sump, you will find a filter inside the gearbox that 'cleans' the hydraulic fluid before it is recycled around the system. Go for this first as it's a lot...
  14. I

    Message Centre 5 beeps

    Hi Matey, sounds like you have a sticky ignition key in sensor, or you have the damn ign switch sensor set to permanent (same as mine). Try some graphite powder in the ignition switch (not WD40). Failing that textbook csn switch this function off. Good luck, Ian.
  15. I

    P38 Turning over but not starting (help!)

    Hi there, thanks for that - Valium does sound like a good idea (preferably whilst watching the damn thing burn)! Seriously though, I think I will have to call in the 'techies' though. Very embarrising when I trained as an auto electrician, but without the diag equipment, I havn't got much...
  16. I

    P38 Turning over but not starting (help!)

    Dear Stephen, Many thanks for that, I have been thinking along the same lines but havn't had the confidence to make a major purchase such as you (very brave). I thought my local RR dealer had all the latest kit, but having spoken to the workshop manager, even he is baffled. I'm going to have...
  17. I

    P38 Turning over but not starting (help!)

    Hi Guys (N Gals), I have a 1996 P38 2.5 DSE which wont start - sounds simple on the surface but..... I drove the car up the drive a couple of months ago and switched off as normal, the alarm went off about 1am and I just got up, checked the car, reset the alarm and went back to bed. The next...
  18. I

    Hello and HELP!

    Thanks for that, but I'm about a posh as an un-posh person on an un-posh day in un-posh land!! Cheers, Ian.
  19. I

    Hello and HELP!

    Hi and thanks for that... No probs re the reply - just letting you know I'm 'ere'. The setting light idea is sounding better by the day, but, I'll have another fish around in the micky bits tomorrow and see what else I can come up with. Cheers, Ian.
  20. I

    Hello from York

    looking forward to seeing you shake your stuff!! P.S my air suspension still works (yeah I'M not kidding!). Not sure if it's a good thing or not! Ian X.