Should i start up again or not ?? Are the customers out there ??:nospamhere:

sounds like tey sent you a front 1 mate

hi alvin get the garage to check the sensor ring on the outer cv joint as these have been known to come loose and the code reader will bring this up as a faulty sensor. hope this helps gaz

local BEARMACH stockist should stock it dont buy br*tpart tho if in doubt buy from main dealers cheers gaz

hi john you can buy the back of the switch on its own at roughly £25 and it is a easy job to do, simply remove the ign cowling and its 2 small philips screws dont rule out the battery though as if its the original will have had its day by now try charging the night before cheers Gaz

no m8 never made it still in arnold

anywhere m8 the cheaper the better lol

hss 10 mm drill bit will do oil to cool it

doing bits mobile cud do with a unit tho

good m8 landys cant keep away lol

check preload on front swivels cheers gaz

real easy to do early 200 disco and classic rr had 3/8 bolts not 10mm to fit then simply drill out the mounting holes with 10 mm drill bit pads on the rear are the same so if caliper looks ok and no leaks just drill the holes cheers gaz

some 1 ask iannotts about his motor and the garage blowing up hehehe lol gaz

Hiya David Gary here formerly of Hucknall Landrovers I,m not setting up a unit yet but can work mobile anything i can do to help including advice feel free to tel me on 07925107795 cheers Gaz

Took ur advice MHM took mob number off cheers

No mate looks like ebay and cheap parts done us lol soon be nobody to phone to for advice fooking gutted too !

sent ya PM

cheers jim gutted that we are closing cant think of me working at main stealers hate them never know enough interest might go mobile as love to keep in the trade.

Hi all, Just found out today that the firm i''m working for (HUCKNALL LANDROVERS) is closing at end of june and i'll be made redundant. Anyone know of any job vacancies around east midlands area for fully qualified mechanic with 25 years experience 15 on landys can work on series 1 throgh to...

hi discofug your problem is your steering preload on your swivels disconect all track rod ends and see how easy both hubs move from side to side there should be 12 to 15 foot pounds resistance but on older discos you usually find that all you need to do is deshim your swivels hope this helps...