HI Has anybody fitted the 3 seat option for the series from Exmoor in a 90, I did email Exmoor but no reply, I am not sure of the fittings etc, might be no go straight off the bat. Thanks Jason

Found quite a few scotch lock connectors already Zeaphod, why do people use them they are causing half the problems with my headlights, lots of soldering for me lol

Just bought a 90 truck cab and have started the shopping list. 1) Raptor binnacle and binnacle mount (set of stainless screws). 2) Crimper and waterproof electrical connectors 3) Soldering Iron and shrink tube. My first problem was the temp gauge running close to red then it started going up...

Cheers Cornish Rattler much appreciated , I will have a look tonight.

Hi I have just purchased a 90 and it has had some mods, i.e. aftermarket head lights, the sidelights are not connected yet and the main beam on the near side when you turn the lights on the bulb is dim and the rear indicator glows (Drivers side no problem), I think this maybe an earthing...

Thanks Huddy I will have a look at the serial numbers .

Couple of Questions 1)I have a 1986 90, now is this classed as a series as it is not a Defender (or just a 90). 2)It is also an ex mod vehicle, would that mean it has a different ratio gearbox fitted. Thanks in advance for your help. Cheers Jason

Cheers Marmaduke, I am kind of in a dilemma in regards to security..no point trying to stop them breaking in, so do i get a tracker and a clutch claw and have done with it ? any suggestions would be welcome .

Thanks Flossie, much appreciated...I did forget about the fuel (or wished that i could)

Cheers Flossie, So my dash is just (Speedo, Oil temp, Water Temp) oil temp gauge not working at moment.

Well this is my first venture into landcover ownership, have been looking at getting one for many years and decided to take the plunge now, looked at 110 first but my other half said she would never go in it (silly girl), so I bought a 90 2 seat truck cab - seemed to make logical sense at the...

Hi I know this is a bit of a strange question, but being a new Landrover owner (90 truck cab 1986). I have been looking at sorting out the dash board and wiring (gulp), I believe the dials and dash are earlier than the 200tdi engine, which leads me to what would the standard dial set be for a...