Anyone know what type of plug is used to connect the towbar electrics to the freelanders main wiring harness. Cheers Richard.

Update. Removed feed and return pipes and did a diesel purge with liqui-moly.ran for a minute and switch engine off and left for a day or so. Removed injectors and stripped them down and put them in an ultrasonic bath. Reassembled and refitted and ran the rest of the diesel purge through...

hi joe, no-one has actually diagnosed anything as i have been doing it myself, apart from when i took it to a friends, but we never did anything other than pull plugs off injectors, hence finding that number 1 was also causing and issue. he also mentioned that each injector has to be coded to...

Thanks for your replies. Took it round to my friends garage today and let him have a listen. It would seem that as well as number 2 injector making knocks, number 1 is as well as unplugging 1 removes the noise. He suggested what some of you have said do a leak off test first and see what that...

Got a knocking on my engine comming from top end. Starts at around 2000 rpm. Goes around 3500rpm. Before and after that engine sounds sweet. Removed injector plugs one at time and found knocking goes when number two is removed. So i swapped number 2 injector for number 4 hoping the knocking...

Hi. I have a td4 with a sloppy gear stick due to a worn pin on input selector shaft. I want to remove the assembly and drill it out for a larger roll pin whilst till in situ. I have removed the 5 flange bolts and the assembly is loose but it wont pull out. Any ideas?? Thanks Richard

Hi there. My gearbox selector pin is worn resulting in a lot of front to back play in gear stick. Looking at the parts list it seams like i can remove the selector assembly by undoing the bolts which hold the flange to the gearbox. Does anyone know if this is as straight forward as it appears...