Looking for tow bar electrics 13 Pin or 12N electrics kit

After the coolant was changed and a while ride, I found the coolant level dropped 1 to 2cm, then tried to top up, but the coolant level came back to the full mark. Does it mean there are still air trapped in the system?

Thanks! I could be confused by the following in the RAVE. Thermostat - Main valve The thermostat is used to maintain the coolant at the optimum temperature for efficient combustion and to aid engine warm-up. The thermostat is closed at temperatures below approximately 82°C (179°F). When the...

This is first time for me to flush my D2 cooling system, I will follow @sierrafery procedure. In terms of RAVE, the thermostat main valve initially opens at 82 degree, and the by-pass flow valve at 1500 rev/min. To flush the radiator, both must be open, which one opens first from cold start...

My D2 td5 has just passed 20 years and 135k milestone. Basically I have serviced, repaired it or replaced lots of parts on my own. I am confident and proud of it, it has no other advisory but a little oil leak on engine harness. I experienced only one breakdown on M4 for sudden alternator...

My passenger side is always higher than driver side unless driver side parks on kerb. I have used nanocom to lower/raise left/right side, but after I drive back, the problem is still there. I am not sure, maybe one of height sensors is faulty.

thanks!

Hi! the captive nut clip at the left side of my D2 td5 engine cover was lost and bolt was stuck see pics. I found one from https://www.ebay.co.uk/itm/282569655864?, but it looks like square one and mine is round one. Does 2004 D2 td5 has different captive nut from previous model? Does anyone...

After replacing front arms to chassis bushes, the steering wheel is off centre to left more than before. I kept the same length of new track rod ends and just increased a bit the length of drag link bar. Now the wheel is centralized in driving. If I let my hands off the wheel in straight...

this seller seems a breaker, can ask them to test on a car.

I saw this one for range rover https://www.ebay.co.uk/itm/296398111644? It looks like mine but oil is different. I don't know if they could have different physical size.

Hi, I need a coram bottle jack for my 2004 discovery 2 td5.

Thanks! sierrafery. I wonder if air was also trapped in ABS module circuit B for empty reservior. Hope to flush it with new fluid after pedal bleeding.

Hi! I need a urgent help for brake bleeding. My front left brake hose banjos bolt was snapped when undoing the day before. I got a new one today. Unfortunately I could have lost some brake fluid although I kept hose banjos end high enough afterwards. It takes about 0.5L to refill the reservoir...

Hi! When I am replacing brake jump flexi hoses, I found the ABS module pipe flare nuts are in impact space for chassis. I wonder which way is better. 1. do/undo the flare nuts on-situ from the top pic. 1 no change, but hard to loose/tighten the nuts, probably two persons' work 2. loose the...

I am going to replace my rear brake pipes of 2004 D2 td5. Having done lots of internet search, some uses SAE flare tool and other DIN one. It seems to me that SAE one produces double flare and DIN one bubble flare. But a seller told me their SAE tool can produce bubble flare too, it has...

Thank you for your inputs. I guess bmw oil flows in from the outside of cylinder filter. The black soot is blocked and cumulated there. The oil looks black. D2 one is inside centrifugal filter for power rotating.

under 30k miles

Sorry for this topic is a bit out of this forum. I just had my wife's 21-plate BMW 320D serviced under warranty and found the engine oil was very black at home (see pics), it is less than 20 miles drive. I suspected if the garage had changed the oil. By googling BMW oil change, some people said...

Hi! I have tried to loose my disco. ACE filter cap using penetrating oil, screw grab and torch heat, but it begins to slip and the rusted cap is a bit rounded out. I should have replaced the cap when I replaced the filter five years back. Any suggestions to remove the stubborn guy are...