Was less than a mile and is all on sleepy rural roads. I had considered doing it the other way around and driving the “chassis cab” down to it, couple of bolts to “secure” and then driving it back.

UA productive day. Bit there’s no going back now. I just hope this was a good idea! The moving it on a sankey was Definitly a little top heavy. That might not have been the best idea but it did the job and wasn’t going very far.

Same here. The issue is the worst angle is nose high. And that is how I need to park on the driveway!

Many thanks to @bluedog333. I have now fitted and soundproofed mine along with the seat brackets. Now need to order the seatbelt mounting bolts and see if I can find the seatbelt I thought I had.

Once again many thanks. I have now fitted and soundproofed mine along with the seat brackets. Now need to order the seatbelt mounting bolts and see if I can find the seatbelt I thought I had.

internal under bonnet? maybe put some pics up of your problem? the ad looks like it is just a straight pipe into the engine bay to the connect pipework to?

What is the problem? the ad looks like it is for a snorkel fitted to the drivers (right) wing which is correct for every vehicle post 200tdi.

I am in the same position. Acceptance is the way forward!

Many thanks. Nothing is on that top bolt just a bolt fitted to fill the hole? If that is the case I will not bother drilling the hole in the first place.

Update on this for anyone else who is searching. The second row door seals are now obsolete, the only option is to order RRC7575 which is for the front door and then modify to fit the second row.

They are not the same, have been out with a tape measure this morning. The front doors are 860mm wide, the second row door is 760mm wide so there must be a separate seal. Does anyone know the part number?

Can a anyone confirm if the seal between the door top and door bottom is the same for the front as it is for the second row? I know the early 110 ali tops use a different seal to the series door tops. I think the part number is RRC7575 but that seems to come up as a front door seal on some...

replaced the tub supports today, the job would have been a lot easier with two people but I managed on my own despite the snow! When I stripped the old ones off I realised I should have also replaced the top hats but I don't have time for that as need it ready to fit next week, these are not...

That would be very much apricated. I think I just need the lower, but want to confirm!

separate thread here: LINK but copied onto this thread as well to keep everything together I thought I already had a thread on this but cannot find it. I currently have nothing so have bought 347844 from YRM and am following the below instructions form my parts manual for retrofitting...

I thought I already had a thread on this but cannot find it. I am rebuilding a station wagon body to swap onto my hardtop (Thread LINK) and am at the point now of wanting to fit the second row seatbelt brackets for the lower mounting of the three point belt. I currently have nothing so have...

LINK Tiger seal come sin white, is probably the same as sikaflex just a different brand. It is a polyurethane adhesive sealant and most importantly comes in white (as well as black)!

You are over reading by 14% based on the speeds you have given. yellow will give a 10% decrease in indicated speed based on having a blue currently so 57mph GPS will be 58.5mph indicated Red will give a 15% decrease in indicated speed based on having a blue currently so 57mph GPS will be...

The ridge for the "dome" centre is much harsher and more pronounced on the aftermarket ones and almost look like it is stuck on rather than being part of the wheel. You can tell tubed vs tubless even with tyres fitted because where the bead ridge is on inside edge on tubless there is an indent...

If you want muds Just get the current BFG mud terrain which I believe is the KM3. I was in the same position with my BFG AT’s. And just bought the latest version when they needed replacing 18months ago. So far have no complaints and they are just as good as the old ones and wearing just as...