The lack of fuel was just a bad connection on the stop solenoid that we had accidentally knocked.

I think we have but the real difficulty is top dead centre. The flywheel doesn't line up with the drain hole, it's set back towards the gearbox so you can't screw the pin in and lock it. You can just about see the notch in the flywheel so we are aligning that with the hole but can't actually pin...

Hi jamesmartin, No we didn't slacken the centre nut. We marked the position of the original timing before we started. When we had fitted everything we then slackened the 3 timing nuts and turned the round disc until the holes all lined up on the pulley and injection pump with a 9.5mm drill...

cleaned stop solenoid wire checked it I dunno just want burning am at end of me teather with it now lol

hi there right to cut a long story short my 300tdi disco auto half snapped its timing belt about 3 weeks ago and snapped a rocker arm and bent a couple of push rods I have replaced every thing new timing kit new rocker arm full set of new push rods got it to a point of starting tonight there's...