have tried recalibration all comms will only let me do simple recalibration. also. have replaced bettery was only reading 11.8 volts. replaced now reads 12.6 volts 14.2 volts when running. any ideas on driver door control panel.?
Air suspension inactive. used all comms got articulation fault. 0 x 64 ox0064 from all coms log. reset drive for 2 mins same again. used live data sensor readings were as follows front left 217 rear left -119 right front -131 right rear 1484 all these...
td6 car was driving fine, stopped at shop for 5 mins came out engine cranking but not start. called aa they came out said it was the lift pump. there seems to be 2 pumps at the tank 1 internal 1 external. any ideas how to test which 1 is broke?:mad:
looked at calipers 1 place listing caliper for my model but here r the part numbers
OEN Part Numbers
BMW 34 11 1 163 303
BMW 34 11 1 163 643
BMW 34 11 1 166 231
BMW 34 11 6 752 425
BMW 34 11 6 768 429
BMW 34 11 6 773 131
LAND ROVER LR005948
£125 if u look under range...
googled that :( I ordered a sensor so will take caliper off clean/check and relace sensor first. just thought if it was abs ecu it would throw up a fault on the all coms
tested battery 12.7 volts after sitting overnight. started car 14.4 volts.
have noticed o/s front wheel has more brake dust than n/s so will check caliper next weekend.
start car drive for 30 - 40 mins inactive suspension lights up abs/hdc etc. stop for couple mins restart all is fine again! had the all coms on it no faults! please help or its time for matches and a gallon of petrol. car is 2004 td6.
purchased an all coms reader used it to reset suspension fault about 6 weeks ago. air suspension showing inactive again but reader wont read it seems it cant connect to suspension. connects to everything else any ideas?