Well it's fixed!! Bought a new compressor to see if it works and it did. I couldn't find a replacement dryer and high pressure switch but got a good price on a new unit for £275+Vat. Gets to 11.8bar very quickly and will rise from access to high mode in 1min 20sec

it seems to me (only seems) that the compressor is fine and building up pressure nicely. The high pressure switch seems to vent to early though. I stripped the compressor assembly just now and ran it and it was building up pressure but when it got to 8.2bar, i heard a woosh of air from the...

Looks like a trip to the Landy specialist tomorrow for a replacement dryer. I ran it last night and it got upto standard height reasonably quick but then on the way back, it had a "hard fault" and my ODBII scanner listed it as "68-Unknown". Not sure what this fault code is (help appreciated)...

I've managed to get it upto 7.5bar. I lightly oiled all the valve/solenoids but the biggest suprise was the drier. The spring that holds it was mega rusty and the drier looks in need of changing. Not sure if the drier clogged would make much difference though??

Another update, the hissing is coming from the high pressure switch at the top of the compressor housing and in particular, the gold coloured cone. No matter what I do, the compressor will run for a few seconds and the the hiss and the compressor stops. I've dropped the pressure to 1.5bar to...

I've done some more checking and when the compressor is running, it gets to about 4.5bar and the a sudden hiss of air from the compressor assembly. I can't see where it's coming from but no I'm thinking that there's a blockage or something?? When I was looking at the compressor, I noticed a...

Thanks for the quick reply I didn't change the head and it did look like there was a gap between the ring and barrel. If there was a leak, wouldn't the compressor just keep running? Thanks again

Hi All First time poster on the forum and hopefully I can get some inspiration from the memebers I bought a L322 TD6 SE 6 months ago and the EAS was spot on. Lately I've been having issues where I get the dredded "susp inactive" and all the lights go out on the height adjuster. I've got a...