Control module is under the passenger seat, move it all the way forward and its an easy 5 phillip screws to remove, look for a post 98 replacement with the cooling fins, much improved module and a straight replacement. Selector switch is bolted to the o/s of the gearbox, you shall see the...

Final update, Changed the Transfer change motor and the RR was stuck in low ratio permanently, then changed the transfer control module and all went well for about 2 miles before Gearbox fault appeared on the message centre. So after reading every article I could find I decided to change the...

Bit stumpted here, I have a very early 4.6HSE that has the 2 cruise control switches on the steering wheel and all the pipework and cables under the bonnet but no cruise control master switch on the centre consul. Where it should be is just a factory blanking switch, my question is are the first...

Yeah already downloaded RAVE, Just back from the Breakers and could not find a replacement anywhere so it looks like Ebay it is. Decided just to change ECU and motor at the same time to try and avoid disappointment. Could not find a gearbox oil temp sensor either so bad day at the breakers all...

Cheers Guys, looks like the Change motor seems favourite, so that will be a job for next weekend. How difficult a job would you say it is and is there any special tools required (not including a swear box)?

Just bought myself my first RR, 1995 P38 4.6 HSE that needs a fair bit of work so thought I would start with this fault. On start up and the message transfer neutral is displayed, I have read over a few posts and some mention fuse 11 should be empty, well mine has a 10 amp fuse in it and the...